MSM7507-01GS-K Ver la hoja de datos (PDF) - Oki Electric Industry

Número de pieza

componentes Descripción

Lista de partido

MSM7507-01GS-K

Single Rail CODEC

Oki Electric Industry 

¡ Semiconductor

MSM7507-01/02/03

RSYNC

Receive synchronizing signal input.

Eight required bits are selected from serial PCM signals on the PCMIN pin by the receive

synchronizing signal.

Signals in the receive section are synchronized by this synchronizing signal. This signal must be

synchronized in phase with the BCLK. The frequency should be 8 kHz ±50 ppm to guarantee the

AC characteristics which are mainly the frequency characteristics of the receive section.

However, if the frequency characteristic of an applied system is not specified exactly, this device

can operate in the range of 8 kHz ±2 kHz, but the electrical characteristics in this specification are

not guaranteed.

XSYNC

Transmit synchronizing signal input.

The PCM output signal from the PCMOUT pin is output in synchronization with this transmit

synchronizing signal. This synchronizing signal triggers the PLL and synchronizes all timing

signals of the transmit section.

This synchronizing signal must be synchronized in phase with BCLK.

The frequency should be 8 kHz ±50 ppm to guarantee the AC characteristics which are mainly

the frequency characteristics of the transmit section.

However, if the frequency characteristic of an applied system is not specified exactly, this device

can operate in the range of 8 kHz ±2 kHz, but the electrical characteristics in this specification are

not guaranteed.

Setting this signal to logic "1" or "0" drives both transmit and receive circuits to the power saving

state.

6/18

Share Link: