BIT3713 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Lista de partido

BIT3713

High Performance PWM Controller

Unspecified 

Beyond Innovation Technology Co., Ltd.

BIT3713

Wave Soldering:

Conventional single wave soldering is not recommended for surface mount devices (SMDs) or printed-circuit boards

with a high component density, as solder bridging and non-wetting can present major problems.

Manual Soldering:

Fix the component by first soldering two diagonally-opposite end leads. Use a low voltage (24 V or less) soldering

iron applied to the flat part of the lead. Contact time must be limited to 10 seconds at up to 300 °C. When using a

dedicated tool, all other leads can be soldered in one operation within 2 to 5 seconds between 270 and 320 °C.

Package Information :

SOP type :

‘05/12/15

Preliminary

BiTEK

December 20, 2005

DCC CONTROLLED

Confidential, for authorized user only

page 10 of 11

Share Link: