QFP
PIN
NO.
58
NAME
98 No Connect
15,72 Power
DESCRIPTION OF PIN FUNCTIONS
SYMBOL
PWRGD
nGAMECS
NC
VCC
BUFFER
TYPE
I
DESCRIPTION
This active high input indicates that the
power (VCC) is valid. For device
operation, PWRGD must be active.
When PWRGD is inactive, all inputs to
the device are disconnected and put into
a low power mode; all outputs are put
into high impedance. The contents of all
registers are preserved as long as VCC
has a valid value. The driver current
drain in this mode drops to ISTBY -
standby current. This input has an
internal 30 ua pull-up.
O4
This is the Game Port Chip Select output
- active low. It will go active when the I/O
address, qualified by AEN, matches that
selected in Configuration register CR1E.
No Connect
Positive Supply Voltage.
6,47, Ground
67,95
GND
Ground Supply.
Note 1: Refer to Configuration Register 00 for information on the pull-ups for these pins.
Note: IDE does not decode for 377, 3F7
Note: RI and the Serial interrupt is always active if system power is applied to the chip.
15