datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga

FDC87W22 Ver la hoja de datos (PDF) - SMSC -> Microchip

Número de pieza
componentes Descripción
Lista de partido
FDC87W22
SMSC
SMSC -> Microchip SMSC
FDC87W22 Datasheet PDF : 140 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
- Extension 2FDD Mode Supports Disk
Drives A And B Through Parallel Port
- JOYSTICK Mode Supports Joystick
Through Parallel Port
Programmable Configuration Settings
Immediate or Automatic Power-Down Mode
for Power Management
ISA Host Interface
All Hardware Power-On Settings Have
Internal Pull-Up or Pull-Down Resistors as
Default Value
Configurable Plug and Play Registers
Infrared Communication Port
100 Pin QFP Package
GENERAL DESCRIPTION
The FDC87W22 integrates a disk drive adapter,
serial port (UART), parallel port, IDE bus
interface, and game port decoder onto a single
chip. The FDC87W22 also has additional
powerful features such as configurable plug-
and-play registers for the whole chip and
infrared support in one of the serial ports.
The disk drive adapter functions of the
FDC87W22 include a floppy disk drive controller
compatible with the industry standard
82077/765 data separator, write pre-
compensation circuit, decode logic, data rate
selection, clock generator, drive interface control
logic, and interrupt and DMA logic. The wide
range of functions integrated into the
FDC87W22 greatly reduces the number of
components required for interfacing with floppy
disk drives. The FDC87W22 supports four
360K, 720K, 1.2M, 1.44M, or 2.88M disk drives
and data transfer rates of 250 Kb/S, 300 Kb/S,
500 Kb/S, and 1 Mb/S.
The FDC87W22 provides two high-speed serial
communication ports (UARTs), one of which
supports serial Infrared communication. Each
UART includes a 16-byte send/receive FIFO, a
programmable baud rate generator, complete
modem control capability, and a processor
interrupt system.
The FDC87W22 supports one PC-compatible
printer port. Additional bidirectional I/O
capability is available by hardware control or
software programming. The parallel port also
supports the Enhanced Parallel Port (EPP) and
Extended Capabilities Port (ECP). The
FDC87W22 supports two embedded hard disk
drive (AT bus) interfaces and a game port with
decoded read/write output. The chip's Extension
FDD Mode and Extension 2FDD Mode allow one
or two external floppy disk drives to be
connected to the computer through the printer
interface pins in notebook computer
applications.
The Extension Adapter Mode of the FDC87W22
allows pocket devices to be installed through the
printer interface pins in notebook computer
applications according to a protocol set by
SMSC, but with upgraded performance. The
JOYSTICK mode allows a joystick to be
connected to a parallel port with a signal
switching cable. The configuration registers
support mode selection, function enable/disable,
and power down function selection. Moreover,
the configurable PnP registers are compatible
with the plug-and-play feature in Windows 95TM,
which makes system resource allocation more
efficient than ever.
Standard Microsystems is a registered trademark and
SMSC is a trademark of Standard Microsystems
Corporation. Other product and company names are
trademarks or registered trademarks of their respective
holders.
2

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]