MB90587 Ver la hoja de datos (PDF) - Fujitsu

Número de pieza

componentes Descripción

Lista de partido

MB90587

16-bit Proprietary Microcontroller

Fujitsu 

MB90580B Series

(Continued)

Item

Part number

MB90587

MB90583B

MB90F583B

MB90V580B

16-bit

I/O

timer

16-bit

free run timer

Number of channels: 1

Overflow interrupts

Output compare

(OCU)

Number of channels: 2

Pin input factor: A match signal of compare register

Input capture (ICU)

Number of channels: 4

Rewriting a register value upon a pin input (rising, falling, or both edges)

Number of inputs: 8

DTP/external interrupt circuit Started by a rising edge, a falling edge, an “H” level input, or an “L” level input.

External interrupt circuit or extended intelligent I/O service (EI2OS) can be used.

Delayed interrupt generation An interrupt generation module for switching tasks used in real time operating

module

systems.

UART0, 1, 2, 3, 4

Clock synchronized transmission (62.5 Kbps to 1 Mbps)

Clock asynchronized transmission (1202 bps to 9615 bps)

Transmission can be performed by bi-directional serial transmission or by master/

slave connection.

A/D converter

Resolution: 8/10-bit changeable

Number of inputs: 8

One-shot conversion mode (converts selected channel only once)

Scan conversion mode

(converts two or more successive channels and can program up to 8 channels.)

Continuous conversion mode (converts selected channel repeatedly)

Stop conversion mode (converts selected channel and stop operation repeatedly)

D/A converter

8-bit resolution

Number of channels: 2 channels

Based on the R-2R system

Low-power consumption

(standby) mode

Sleep/stop/CPU intermittent operation/clock timer/hardware standby

Process

CMOS

Power supply voltage for

operation*

4.5 V to 5.5 V *2

*1 : It is setting of DIP switch S2 when Emulation pod (MB2145-507) is used.

Please refer to the MB2145-507 hardware manual (2.7 Emulator-specific Power Pin) about details.

*2 : Varies with conditions such as the operating frequency (See section “s ELECTRICAL CHARACTERISTICS”).

Assurance for the MB90V580B is given only for operation with a tool at a power supply voltage of 4.5 V to 5.5

V, an operating temperature of 0 to +25 °C, and an operating frequency of 1 MHz to 16 MHz.

s PACKAGE AND CORRESPONDING PRODUCTS

Package

MB90583B

MB90587

MB90F583B

FPT-100P-M05

FTP-100P-M06

: Available ×: Not available

Note: For more information about each package, see section “s PACKAGE DIMENSIONS”.

5

Share Link: