SED1330 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Lista de partido

SED1330

CMOS GRAPHIC LCD CONTROLLER

Unspecified 

SED1330

CMOS GRAPHIC LCD CONTROLLER

This part is replaced by SED1335. Some pin differences between SED1330 and SED1335 exist. Please check

SED1335 data sheet. S-MOS Systems, Inc., will continue to support existing designs which use SED1330.

s DESCRIPTION

The SED1330 is a CMOS low-power dot matrix liquid crystal graphic display controller. The device stores in

external RAM display data sent by an 8-bit microcomputer, and generates all the signals required by the LCD

drivers. The LSI incorporates an internal character generator ROM which supports user-defined characters

(also an external CGROM can be supported).

The SED1330 can be interfaced to high-speed microprocessors such as the Intel family or Motorola family.

The controller supports a set of rich commands that will allow the user to create a layered display of characters

and graphics.

Also, the controller functions as a pipeline buffer between the MPU and display memory so that low-cost,

medium-speed SRAM can be used.

s FEATURES

• CMOS low-power graphic and character display

controller

• Selectable MPU interface is compatible with both

the Intel family and the Motorola family

• Smooth scrolling support:

Horizontal and vertical scroll

Scrolling of selected areas of the display

• Multimode display:

2 layers of overlapping character and graphics

3 layers of overlapping graphics

• Selectable display synthesis:

Inverse video

Flashing display, cursor on/off/blink

Under and bar cursor, block cursor

Simple animation

• Programmable cursor

• Internal character generator ROM

• Supports external character generator ROM:

8 × 8 or 8 × 16 pixel characters

Allows mixing of ROM and RAM character sets

• Supports 64K bytes of memory:

2 of 32K × 8 100ns SRAM

or 8 of 8K × 8 100ns SRAM

• Display duty .................................. 1/2 to 1/256

• Low power dissipation ................ 5mA (typical)

0.05µA (typical), standby

• Logic power supply ........................ 4.5 to 5.5V

• Package ................ Plastic QFP5-60 pin (FBA)

Plastic QFP6-60 pin (FBB)

s SYSTEM BLOCK DIAGRAM

DATA

CPU CONTROL

SED1330F

68xx

80xx

SRAM

125

LCD

Share Link: