66012 Ver la hoja de datos (PDF) - Micropac Industries

Número de pieza

componentes Descripción

Lista de partido

66012

FOUR CHANNEL, HERMETICALLY SEALED, LOW-INPUT CURRENT, 6N140 OPTOCOUPLER

Micropac Industries 

66012

FOUR CHANNEL, HERMETICALLY SEALED, LOW-INPUT

CURRENT, 6N140 OPTOCOUPLER

Mii

OPTOELECTRONIC PRODUCTS

DIVISION

Features:

• DSCC Approved 8302401EX

• High current transfer ratio: 1000% typical

• 1500 Vdc isolation test voltage

• Low input current requirement: 0.5mA

Applications:

• Military and Space

• High reliability systems

• Voltage Level Shifting

• Isolated Receiver Input

• Communication systems

DESCRIPTION

The 66012 optocoupler contains four infrared LEDs optically coupled to four corresponding high gain photon detectors. This

unique quad optocoupler provides high CTR and low leakage currents over the full military temperature range (-55° to

+125°C). The 66012 is a 16 pin dual-in-line, hermetically sealed package and is available in standard and MIL-PRF-38534

screened versions or tested to customer specifications.

ABSOLUTE MAXIMUM RATINGS

Storage Temperature........................................................................................................................................... -65°C to +150°C

Operating Free-Air Temperature Range ............................................................................................................. -55°C to +125°C

Lead Solder Temperature.........................................................................................260°C for 10s (1.6mm below seating plane)

Peak Forward Input Current (each channel) ............................................................................................... 20mA (1ms duration)

Average Forward Input Current ........................….(see Note 3) .......................................................................................... 10mA

Reverse Input Voltage ...............................................................................................................................................................5V

Output Current - IO (each channel) ...................................................................................................................................... 40mA

Output Power Dissipation (each channel) ..............(see Note 2)........................................................................................ 50mW

Supply Voltage - VCC ............................................... (see Note 1) ............................................................................... -0.5 to 20V

Output Voltage - VO (each channel).……..............(see Note 1)............................................................................... . -0.5 to 20V

Package Dimensions

Schematic Diagram

DATE CODE

.790 [20.06]

.820 [20.83]

Mii

6N140

XXXX

.320 [8.13]

MAX

A

1

K

2

A

3

K

4

15

VCC

14

V01

13

V02

PIN 1

.020 [0.51]

0.150 [3.81]

0.170 [4.32

MAX]

.090 [2.29]

.110 [2.79]

0.20 [0.51]

MAX

ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]

.290 [7.37]

.310 [7.87]

.007 [0.18]

0.13 [0.33]

A

6

K

5

A

7

K

8

12

V03

11

V04

10

GND

Notes:

1. Derate IF at 0.05 mA/°C above 25°C.

2. Collector output power plus one fourth of the total supply power is total output power. Derate at 0.46mW/°C above 25°C.

3. The lowest total IOH over temperature is developed by keeping VCC as low as possible, but greater that 2 volts. The

negative voltage at the detector side should be applied to Pin 10.

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918

www.micropac.com E-MAIL: optosales@micropac.com

3 - 26

Share Link: