Table 5. SPORT0 Configuration
Bit
Setting
Comment/Description
ISCLK 1
Serial clock is generated internally
SLEN 1111
16 bits of conversion data
RFSR 0
Receive frame sync required every word
TFSR Don’t care Not used
IRFS 0
RFS is set to be an input and is
generated externally.
ITFS Don’t care Not used
RFSW 1
Alternate receive framing
TFSW Don’t care Not used
INVRFS 0
RFS is active high
INVTFS Don’t care Not used
AD7457
SPORT0 is configured by setting the bits in its control register,
as listed in Table 5.
The flag to generate the CS signal is generated by SPORT1. It is
connected to both the ADC and the RFS input of SPORT0 to
provide the frame sync signal for the DSP.
Rev. A | Page 15 of 20