BS616LV1622TIG70 Ver la hoja de datos (PDF) - Brilliance Semiconductor
Número de pieza
componentes Descripción
Lista de partido
BS616LV1622TIG70 Datasheet PDF : 10 Pages
| |||
BSI
BS616LV1622
PIN DESCRIPTIONS
Name
A0-A19 Address Input
Function
These 20 address inputs select one of the 1,048,576 x 16-bit words in the RAM.
SAE Address Input
CIO x8/x16 select input
CE1 Chip Enable 1 Input
CE2 Chip Enable 2 Input
WE Write Enable Input
OE Output Enable Input
LB and UB Data Byte Control Input
D0 - D15 Data Input/Output Ports
This address input incorporates with the above 20 address inputs select one of the
2,097,152 x 8-bit bytes in the RAM if the CIO is LOW. Don't use when CIO is HIGH.
This input selects the organization of the SRAM. 1,048,576 x 16-bit words
configuration is selected if CIO is HIGH. 2,097,152 x 8-bit bytes configuration is
selected if CIO is LOW.
CE1 is active LOW and CE2 is active HIGH. Both chip enables must be active when
data read from or write to the device. If either chip enable is not active, the device is
deselected and is in a standby power mode. The DQ pins will be in the high
impedance state when the device is deselected.
The write enable input is active LOW and controls read and write operations. With the
chip selected, when WE is HIGH and OE is LOW, output data will be present on the
DQ pins; when WE is LOW, the data present on the DQ pins will be written into the
selected memory location.
The output enable input is active LOW. If the output enable is active while the chip is
selected and the write enable is inactive, data will be present on the DQ pins and they
will be enabled. The DQ pins will be in the high impedance state when OE is inactive.
Lower byte and upper byte data input/output control pins. The chip is deselected when
both LB and UB pins are HIGH.
These 16 bi-directional ports are used to read data from or write data into the RAM.
Vcc
Power Supply
Gnd
Ground
R0201-BS616LV1622
2
Revision 2.1
Jan. 2004
Share Link: 