FM24C16B Ver la hoja de datos (PDF) - Unspecified
Número de pieza
componentes Descripción
Lista de partido
FM24C16B Datasheet PDF : 12 Pages
| |||
FM24C16B - 16Kb 5V I2C F-RAM
Electrical Specifications
Absolute Maximum Ratings
Symbol
Description
VDD
Power Supply Voltage with respect to VSS
VIN
Voltage on any signal pin with respect to VSS
TSTG
TLEAD
VESD
Storage Temperature
Lead Temperature (Soldering, 10 seconds)
Electrostatic Discharge Voltage
- Human Body Model (AEC-Q100-002 Rev. E)
- Charged Device Model (AEC-Q100-011 Rev. B)
- Machine Model (AEC-Q100-003 Rev. E)
Package Moisture Sensitivity Level
Ratings
-1.0V to +7.0V
-1.0V to +7.0V
and VIN < VDD+1.0V *
-55C to +125C
260 C
4kV
1.25kV
100V
MSL-1
* Exception: The “VIN < VDD+1.0V” restriction does not apply to the SCL and SDA inputs.
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating
only, and the functional operation of the device at these or any other conditions above those listed in the operational section of
this specification is not implied. Exposure to absolute maximum ratings conditions for extended periods may affect device
reliability.
DC Operating Conditions (TA = -40 C to + 85 C, VDD = 4.5V to 5.5V unless otherwise specified)
Symbol
Parameter
Min
Typ
Max Units
VDD Main Power Supply
IDD VDD Supply Current
@ SCL = 100 kHz
4.5
5.0
5.5
V
100
A
@ SCL = 400 kHz
@ SCL = 1 MHz
200
A
400
A
ISB Standby Current
4
10
A
ILI Input Leakage Current
±1
A
ILO Output Leakage Current
VIL Input Low Voltage
VIH Input High Voltage
VOL Output Low Voltage
@ IOL = 3 mA
RIN Input Resistance (WP pin)
For VIN = VIL (max)
For VIN = VIH (min)
-0.3
0.7 VDD
40
1
±1
A
0.3 VDD
V
VDD + 0.3
V
0.4
V
K
M
VHYS Input Hysteresis
0.05 VDD
V
Notes
1
2
3
3
5
4
Notes
1. SCL toggling between VDD-0.3V and VSS, other inputs VSS or VDD-0.3V.
2. SCL = SDA = VDD. All inputs VSS or VDD. Stop command issued.
3. VIN or VOUT = VSS to VDD. Does not apply to WP pin.
4. This parameter is characterized but not tested.
5. The input pull-down circuit is strong (40K) when the input voltage is below VIL and much weaker (1M)
when the input voltage is above VIH.
Rev. 1.3
July 2011
Page 8 of 12
Share Link: 