HS-303CEH Ver la hoja de datos (PDF) - Intersil
Número de pieza
componentes Descripción
Lista de partido
HS-303CEH Datasheet PDF : 10 Pages
| |||
HS-303CEH
Electrical Specifications VSUPPLY = ±15V unless otherwise specified. Boldface limits apply across the operating temperature range,
-55°C to +125°C. (Continued)
SYMBOL
PARAMETER
TEST CONDITIONS
MIN
MAX
(Note 5) TYP (Note 5) UNITS
CC2 Driver Input Capacitance
COS Switch Output
VA = 15V (Notes 3, 4)
Measured Drain to GND (Notes 3, 4)
10
pF
28
pF
VISO Off Isolation
VGEN = 1Vp-p, f = 1MHz (Notes 3, 4)
40
dB
VCR Cross Talk
VGEN = 1Vp-p, f = 1MHz (Notes 3, 4)
40
dB
VCTE Charge Transfer Error
VS = GND, CL= 0.01µF (Notes 3, 4)
15
mV
tOPEN Break-Before-Make Time Delay
RL = 300Ω, VS = 3V, VAH = 5V, VAL = 0V
10 50 300
ns
tON Switch Turn “ON” Time
RL = 300Ω, VS = 3V, VAH = 4V, VAL = 0V
250 500
ns
tOFF Switch Turn “OFF” Time
RL = 300Ω, VS = 3V, VAH = 4V, VAL = 0V
200 450
ns
NOTES:
3. Limits established by characterization and are not production tested.
4. VAL = 0V and VAH = 4V.
5. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established by characterization
and are not production tested.
Post Radiation Characteristics VSUPPLY = ±15V unless otherwise specified. This data is typical test data post radiation exposure at a
rate of 50 to 300rad(Si)/s. This data is intended to show typical parameter shifts due to total ionizing dose (high dose radiation) TA= +25°C.
SYMBOL
PARAMETER
TEST CONDITIONS
0k 100k UNITS
+rDS(ON)
-rDS(ON)
+IS(OFF)
-IS(OFF)
+ID(OFF)
-ID(OFF)
+ID(ON)
“Switch On” Resistance
VD = 10V, IS = -10mA
“Switch On” Resistance
VD = -10V, IS = 10mA
Leakage Current into Source of an “OFF” Switch
VS = +14V, VD = -14V
VS = +15V, VD = -15V
Leakage Current into Source of an “OFF” Switch
VS = -14V, VD = +14V
VS = -15V, VD = +15V
Leakage Current into Drain of an “OFF” Switch
VS = +14V, VD = -14V
VS = +15V, VD = -15V
Leakage Current into Drain of an “OFF” Switch
VS = -14V, VD = +14V
VS = -15V, VD = +15V
Leakage Current from an “ON” Driver into the Switch (Drain VS = +14V, VD = +14V
and Source)
34
35
Ω
28
29
Ω
-0.20 -0.31 nA
-0.003 -0.47 µA
0.30 0.84 nA
0.001 0.02 µA
-1.20 -0.90 nA
-0.001 -0.001 µA
0.31 0.90 nA
0.0003 0.001 µA
-0.2 -0.55 nA
-ID(ON)
IAL
IAH
I+
I-
tOPEN
tON
tOFF
Leakage Current from an “ON” Driver into the Switch (Drain VS = -14V, VD = -14V
and Source)
Low Level Input Address Current
All Channels VA = 0.8V
High Level Input Address Current
All Channels VA = 4.0V
Positive Supply Current
All Channels VA = 0.8V
VA1 = 0V, VA2 = 4V
VA1 = 4V, VA2 = 0V
Negative Supply Current
All Channels VA = 0.8V
VA1 = 0V, VA2 = 4V
VA1 = 4V, VA2 = 0V
Break-Before-Make Time Delay
RL = 300Ω, VS = 3V, VAH = 5V, VAL = 0V
Switch Turn “ON” Time
RL = 300Ω, VS = 3V, VAH = 4V, VAL = 0V
Switch Turn “OFF” Time
RL = 300Ω, VS = 3V, VAH = 4V, VAL = 0V
0.15 0.28 nA
0.35 0.25 nA
1.98 1.47 nA
55
53 µA
167.2 113.7 µA
-0.01 -0.01 µA
-0.01 -0.02 µA
42
47 ns
224 213 ns
192 173 ns
4
FN8399.1
April 19, 2013
Share Link: 