IR062HD4C10U-P2
IR082HD4C10U-P2
Dynamic Electrical Characteristics
VBIAS (VCC, VBS) = 15V and TA = 25°C unless otherwise specified. Switching time waveform definitions are shown in
figure 2. Refer to IC data sheets (IR2106 and IR2108) for further characteristics.
Symbol
ton
toff
trr
Qrr
Definition
Turn-on propagation delay (see note 2)
Turn-off propagation delay (see note 2)
Reverse recovery time (FRED Diode)
Reverse recovery charge (FRED Diode)
-IR062
-IR082
-IR062
-IR082
Min.
—
—
—
—
—
—
Typ. Max. Units Test Conditions
220 310
Vo = 0V
680 900
257 380
Vo = 575V
220 400 ns
28 —
IF = 400mA
40 — nC
di/dt = 100 A/us
Note 2: Switching times as specified and illustrated in figure 2 are referenced to the VO output voltage.
This is shown as VO in figure 2.
Static Electrical Characteristics
VBIAS (VCC, VBS) = 15V and TA = 25°C unless otherwise specified. The VIN and IIN parameters are referenced to COM.
Symbol
Definition
TA = 25 oC
Min. Typ. Max. Units Test Conditions
VCCUV+
VBSUV+
VCCUV-
VBSUV-
VCC supply undervoltage positive going
threshold
VCC supply undervoltage negative going
threshold
8.0 8.9 9.8 V
V
7.4 8.2 9.0 V
IQCC
Quiescent VCC supply current
0.4 1.0 1.6 mA
IQBO
Quiescent VBO supply current
20 60 150
ILK
Offset supply leakage current
@25°C —
— 100
VB = 575V
IINLK
Vin to VO leakage current
@25°C —
— 250
µA
@150°C — 1000 —
VIN = 575V,
VO = 0V
IOLK
VO leakage current
@25°C —
@150°C —
— 250
1000 —
VO = 575V
VIH
Logic “1” input voltage
VIL
Logic “0” input voltage
2.7 — —
—
— 0.8
V VCC = 10V to 20V
IIN+
Logic “1” input bias current
IIN-
Logic “0” input bias current
—
20 40
µA
—
—
1
VIN = 5V
VCE(on) Collector-to-Emitter saturation voltage
— 3.0 —
IC = 400mA
VEC
Diode forward voltage
— 1.2 —
V
IE = 400mA
VF
Bootstrap Diode forward voltage (D1)
— 1.5 —
IF = 400mA
4
www.irf.com