MAX2057(2010) Ver la hoja de datos (PDF) - Maxim Integrated

Número de pieza

componentes Descripción

Lista de partido

MAX2057
(Rev.:2010)

1300MHz to 2700MHz Variable-Gain Amplifier with Analog Gain Control

Maxim Integrated 

19-3510; Rev 1; 12/10

EVAALVUAAILTAIOBNLEKIT

1300MHz to 2700MHz Variable-Gain

Amplifier with Analog Gain Control

General Description

The MAX2057 general-purpose, high-performance vari-

able-gain amplifier (VGA) is designed to operate in the

1300MHz to 2700MHz frequency range*. This device

features 15.5dB of gain, 6dB of noise figure, and an out-

put 1dB compression point of 23.8dBm. The MAX2057

also provides an exceptionally high OIP3 level of

37dBm, which is maintained over the entire attenuation

range. In addition, the on-chip analog attenuators yield

infinite control and high attenuation accuracy over

selectable 21dB or 42dB control ranges. Each of these

features makes the MAX2057 an ideal VGA for

DCS/PCS, cdma2000™, W-CDMA, and PHS/PAS trans-

mitter and power amplifier AGC circuits.

The MAX2057 is pin compatible with the MAX2056

800MHz to 1000MHz VGA, making this family of ampli-

fiers ideal for applications where a common PC board

layout is used for both frequency bands.

The MAX2057 operates from a single +5V supply and is

available in a compact 36-pin thin QFN package (6mm

x 6mm x 0.8mm) with an exposed pad. Electrical per-

formance is guaranteed over the extended -40°C to

+85°C temperature range.

Applications

DCS 1800/PCS 1900 2G and 2.5G EDGE Base-

Station Transmitters and Power Amplifiers

cdmaOne™, cdma2000, Base-Station

Transmitters and Power Amplifiers

WCDMA, LTE, TD-SCDMA, and TD-LTE

Transmitters and Power Amplifiers

PHS/PAS Base-Station Transmitters and Power

Amplifiers

Transmitter Gain Control

Receiver Gain Control

Broadband Systems

Automatic Test Equipment

Digital and Spread-Spectrum Communication

Systems

Microwave Terrestrial Links

Features

o 1300MHz to 2700MHz RF Frequency Range*

o 37dBm Constant OIP3 (Over All Gain Settings)

o 23.8dBm Output 1dB Compression Point

o 15.5dB Typical Gain at Maximum Gain Setting

o 0.5dB Gain Flatness Over 100MHz Bandwidth

o 6dB Noise Figure at Maximum Gain Setting (Using

1 Attenuator)

o Two Gain-Control Ranges: 21dB and 42dB

o Analog Gain Control

o Single +5V Supply Voltage

o Pin Compatible with MAX2056, 800MHz to

1000MHz RF VGA

o External Current-Setting Resistors Provide Option

for Operating VGA in Reduced-Power/Reduced-

Performance Mode

o Lead-Free Package Available

*Note: Operation beyond this range is possible, but has not been

characterized.

Ordering Information

PART

TEMP RANGE PIN-PACKAGE

MAX2057ETX+

-40°C to +85°C

36 Thin QFN-EP**

6mm x 6mm

MAX2057ETX+T

-40°C to +85°C

36 Thin QFN-EP**

6mm x 6mm

**EP = Exposed pad.

+Denotes a lead(Pb)-free/RoHS-compliant package.

T = Tape-and-reel package.

Pin Configuration/Functional Diagram appear at end of data

sheet.

cdmaOne is a trademark of CDMA Development Group.

cdma2000 is a registered trademark of Telecommunications

Industry Association.

________________________________________________________________ Maxim Integrated Products 1

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,

or visit Maxim’s website at www.maxim-ic.com.

Share Link: