PCA9561 Ver la hoja de datos (PDF) - Philips Electronics
Número de pieza
componentes Descripción
Lista de partido
PCA9561 Datasheet PDF : 17 Pages
| |||
Philips Semiconductors
Quad 6-bit multiplexed I2C EEPROM DIP switch
Product data sheet
PCA9561
ABSOLUTE MAXIMUM RATINGS1, 2
In accordance with the Absolute Maximum Rating System (IEC 134).
Voltages are referenced to GND (ground = 0 V).
SYMBOL
PARAMETER
CONDITIONS
RATING
UNIT
VDD
DC supply voltage
–0.5 to +4.0
V
VI
DC input voltage
Note 3
–1.5 to +5.5
V
VOUT
DC output voltage
Note 3
–0.5 to +5.5
V
Tstg
Storage temperature range
–60 to +150
°C
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150 °C.
3. The maximum input or output voltage is the lesser of 5.5 V or VDD + 4.0 V, except for very short (e.g., system start-up or shut-down)
durations.
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
CONDITIONS
LIMITS
MIN
MAX
UNIT
VDD
DC supply voltage
VIL
LOW-level input voltage
VIH
HIGH-level input voltage
VOL
LOW-level output voltage
VIL
LOW-level input voltage
SCL, SDA
SCL, SDA
SCL, SDA
MUX_IN,
MUX_SELECT_0
MUX_SELECT_1
—
IOL= 3 mA
IOL= 3 mA
IOL= 3 mA
IOL= 6 mA
—
3.0
3.6
V
–0.5
0.9
V
2.7
5.5 1
V
—
0.4
V
—
0.6
V
–0.5
0.8
V
VIH
HIGH-level input voltage
MUX_IN,
MUX_SELECT_0
—
MUX_SELECT_1
2.0
5.5 1
V
IOL
LOW-level output current
MUX_OUT
—
IOH
HIGH-level output current
MUX_OUT
—
dt/dv
Input transition rise or fall time
—
—
8
mA
—
100
µA
0
10
ns/V
Tamb
Operating temperature
—
–40
85
°C
NOTES:
1. The maximum input voltage is the lesser of 5.5 V or VDD + 4.0 V, except for very short (e.g., system start-up or shut-down) durations.
2004 May 17
10
Share Link: 