4241 Ver la hoja de datos (PDF) - Peregrine Semiconductor Corp.
Número de pieza
componentes Descripción
Lista de partido
4241 Datasheet PDF : 8 Pages
| |||
PE4241
Product Specification
Table 5. Single-pin Control Logic Truth Table
Control Voltages
Signal Path
Pin 6 (CTRL or VDD) = VDD
Pin 4 (CTRL) = High
Pin 6 (CTRL or VDD) = VDD
Pin 4 (CTRL) = Low
RFC to RF1
RFC to RF2
Table 6. Complementary-pin Control Logic
Truth Table
Control Voltages
Signal Path
Pin 6 (CTRL or VDD) = Low
Pin 4 (CTRL) = High
RFC to RF1
Pin 6 (CTRL or VDD) = High
Pin 4 (CTRL) = Low
RFC to RF2
Control Logic Input
The PE4241 is a very versatile RF CMOS switch
that supports two operating control modes; single-
pin control mode and complementary-pin control
mode.
Single-pin control mode enables the switch to
operate with a single control pin (pin 4) supporting
a +3-volt CMOS logic input, and requires a
dedicated +3-volt power supply connection on pin
6 (VDD). This mode of operation reduces the
number of control lines required and simplifies the
switch control interface typically derived from a
CMOS µProcessor I/O port.
Complementary-pin control mode allows the
switch to operate using complementary control
pins CTRL and CTRL (pins 4 & 6), that can be
directly driven by +3-volt CMOS logic or a suitable
µProcessor I/O port. This enables the PE4241 to
be used as a potential alternate source for SPDT
RF switch products used in positive control
voltage mode and operating within the PE4241
operating limits.
Document No. 70-0094-01 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 3 of 8
Share Link: 