PE42693 Ver la hoja de datos (PDF) - Peregrine Semiconductor Corp.
Número de pieza
componentes Descripción
Lista de partido
PE42693 Datasheet PDF : 4 Pages
| |||
PE42693
Product Brief
Table 1. Target Electrical Specifications @ +25 °C, VDD = 2.75 V (ZS = ZL = 50 Ω)
Parameter
Condition
Typ Units
Insertion Loss1
TRX - Ant (850 WCDMA)
TRX - Ant (1950 / 2140 WCDMA)
TX - Ant (850 / 900)
TX - Ant (1800 / 1900)
RX - Ant (850 / 900)
RX - Ant (1800 / 1900)
0.7
dB
0.8 / 0.9
dB
0.7
dB
0.85
dB
1.1
dB
1.25
dB
Return Loss
Isolation
All Ports in On State
TX - RX (850 / 900)
TX - RX (1800 / 1900)
TRX - RX (850 / 900)
TRX - RX (2200)
TX - TRX (850 / 900)
TX - TRX (2200)
TX - TX (850 / 900)
TX - TX (1800 / 1900)
20
dB
51
dB
45
dB
43
dB
34
dB
34
dB
28
dB
31
dB
26
dB
2nd Harmonic2
TX 850/900 MHz, +35 dBm output power, 50 Ω
TX 1800/1900 MHz, +33 dBm output power, 50 Ω
-87
dBc
-86
dBc
3rd Harmonic2
TX 850/900 MHz, +35 dBm output power, 50 Ω
TX 1800/1900 MHz, +33 dBm output power, 50 Ω
-76
dBc
-77
dBc
WCDMA Band I IMD3
TRX – Measured in a 50 Ω system at 2.14 GHz at the TX1 port. Input signals are referenced to the ANT
port with +20 dBm CW signal at 1.95 GHz and -15 dBm CW signal at 1.76 GHz
-110
dBm
WCDMA Band I IIP3
TRX – Measured in a 50 Ω system at 2.14 GHz at the TX1 port. Input signals are referenced to the ANT
port with +20 dBm CW signal at 1.95 GHz and -15 dBm CW signal at 1.76 GHz
+68
dBm
Switching time
50% of control to (10/90%) RF
2
µs
Notes: 1. Insertion loss specified with optimal ANT impedance matching with the outermost ANT bondpad.
2. Pulsed RF input duty cycle of 50% and 4620 µs, measured per 3GPP TS 45.005.
Note: All datasheet parameters are tested and specified using only the antenna pad connection closest to edge of the die. Additional antenna pad
connections have been added to allow customers to select different wirebond lengths which can be used to optimize performance.
Table 2. Operating Ranges
Parameter
Symbol Min Typ Max Units
Temperature range
TOP
-40
+85 °C
VDD Supply Voltage
VDD 2.65 2.75 3.2
V
IDD Power Supply Current
(VDD = 2.6V)
IDD
TX input power3 (VSWR 3:1) PIN
13 20 µA
+35 dBm
RX input power3 (VSWR 3:1) PIN
+20 dBm
Control Voltage High
Control Voltage Low
VIH
1.4
VIL
V
0.4 V
Note: 3. Pulsed RF input duty cycle of 50% and 4620 µs,
measured per 3GPP TS 45.005.
Part performance is not guaranteed under these
conditions. Exposure to absolute maximum conditions
for extended periods of time may adversely affect
reliability. Stresses in excess of absolute maximum
ratings may cause permanent damage.
©2007 Peregrine Semiconductor Corp. All rights reserved.
Page 2 of 4
Table 3. Absolute Maximum Ratings
Symbol Parameter/Conditions Min Max Units
VDD Power supply voltage
VI Voltage on any DC input
TST Storage temperature range
TOP Operating temperature range
TX input power (50 Ω)4,5
-0.3
4.0
V
-0.3 VDD+ 0.3 V
-65 +150 °C
-40
+85
°C
+38
PIN(50 Ω) TRX input power (50 Ω)4,5
RX input power (50 Ω) 4,5
+35 dBm
+23
TX input power (VSWR ∞ :1) 4,5
PIN (∞ :1)
TRX input power (VSWR ∞ :1)4,5
ESD Voltage (HBM, MIL_STD
883 Method 3015.7)
VESD ESD Voltage (MM, JEDEC,
JESD22-A114-B)
+35
+32
1500
100
dBm
V
V
Notes: 4. Pulsed RF input duty cycle of 50% and 4620 µs, measured
per 3GPP TS 45.005.
5. VDD within operating range specified in Table 2.
Document No. 70-0231-01 │ UltraCMOS™ RFIC Solutions
Contact sales@psemi.com for full version of datasheet
Share Link: 