ST1S12XX(2008) Ver la hoja de datos (PDF) - STMicroelectronics
Número de pieza
componentes Descripción
Lista de partido
ST1S12XX
(Rev.:2008)
(Rev.:2008)
STMicroelectronics
ST1S12XX Datasheet PDF : 20 Pages
| |||
ST1S12xx
Synchronous rectification with enable, 0.7 A, 1.7 MHz fixed or
adjustable step-down switching regulator in TSOT23-5L
Features
■ Step-down current mode PWM (1.7 MHz) DC-
DC converter
■ 3% DC output voltage tolerance
■ Synchronous rectification
■ Fixed output voltage 1.2 V, 1.8 V, and ADJ
(available on request 1.5 V, 2.5 V and 3.3 V)
■ Enable function
■ Internal soft start
■ Typical efficiency: > 90%
■ 0.7 A output current capability
■ Not switching quiescent current: max 600 µA
over temperature range
■ RDSON typ. 250 mΩ and 400 mΩ
■ Uses tiny capacitors and inductors
■ Operative junction temp. -40°C to 125°C
■ Available in TSOT23-5L package
TSOT23-5L
required. Moreover, a low output ripple is
guaranteed by the current mode PWM topology
and by the use of low ESR SMD ceramic
capacitors. The device is thermally protected and
the current is limited to prevent damage due to
accidental short-circuit. The ST1S12Gxx is
available in the TSOT23-5L package.
Description
The ST1S12Gxx is a step down DC-DC converter
optimized for powering low-voltage digital cores in
HDD applications and, generally, to replace the
high current linear solution when the power
dissipation may cause high heating of the
application environment. It provides up to 0.7 A
over an input voltage range of 2.5 V to 5.5 V. A
high switching frequency (1.7 MHz) allows the
use of tiny surface-mount components. In addition
to the resistor divider to set the output voltage
value, only an inductor and two capacitors are
Table 1. Device summary
Part numbers
Order codes
ST1S12XX
ST1S12XX12
ST1S12XX18
1. Available on request.
ST1S12GR
ST1S12G12R
ST1S12G18R (1)
Package
TSOT23-5L
TSOT23-5L
TSOT23-5L
February 2008
Rev 2
1/20
www.st.com
20
Share Link: