L6377 Ver la hoja de datos (PDF) - STMicroelectronics

Número de pieza

componentes Descripción

Lista de partido

L6377

0.5 A high-side driver quad intelligent power switch

STMicroelectronics 

L6377

7

Over current operation

Over current operation

In order to implement a short circuit protection the output power MOS is driven in linear

mode to limit the output current to the Isc value. This Isc limit is externally settable by means

of an external 1/4 W resistor connected from Rsc pin and GND. The value of the resistor

must be chosen according to the following formula:

Isc (A) = 5/Rsc (kΩ)

with

5 < Rsc < 30 (kΩ)

For

Rsc < 5 (kΩ)

Isc is limited to Isc = 1.1 A (typical value).

This condition (current limited to the Isc value) lasts for a Ton time interval, that can be set

by means of a capacitor (CDON) connected to the ON DELAY pin according to the following

formula:

tON = 1.28 µs/pF

for

50 pF < CDON < 2 nF

After the ton interval has expired the output power MOS is switched off for the tOFF time

interval with:

tOFF = 64*tON.

Figure 5. Short circuit operation waveforms

OUTPUT

CURRENT

Isc

Iout

DIAG

(active low)

t<tON

Short Circuit

tON

tOFF

tON

tOFF

Short Circuit

Time

D94IN105

Time

9/16

Share Link: