datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga

TSC0620 Ver la hoja de datos (PDF) - Traco Power

Número de pieza
componentes Descripción
Lista de partido
TSC0620
Traco
Traco Power Traco
TSC0620 Datasheet PDF : 13 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
DC/DC Converter
TSC Series
40 to 2500 Watt
Alarm Options
Power fail
– Option ”p”
Signal if input voltage drops below the specified
limit
Signal output is NPN open collector,activated in
ok-status
DC-ok
– Option ”d” Signal if input voltage drops below the specified
limit
Signal output is NPN open collector,activated in
ok-status
Relay output
– Option ”r” Relay instead of logical output for alarm signals
(in combination with option p and d)
Control Options
External On/Off
– Option ”H1”
By external closing contact, signal referred to
input.
– Option ”H2” By voltage signal (5V/10mA), signal referred to
output.
– Option ”H3” By external closing contact, signal referred to
output.
External programming
– Option ”e” External programming of the output voltage by
a potentiometer or an external voltage of 0VDC
to 10VDC. Details need to be specified.
I/O Options
Current sharing
– Option ”cs”
Provides balanced load for units in parallel
operation. Controlled over interconnecting wire.
Decoupling diode
– Option ”dd” For redundant operation. Internal fault of one
unit does not affect other units in a parallel
circuit.
Inrush current limiting
– Option ”i” A thermistor in series to the input lines reduces
its resistance when it gets warm.
Mechanical Options
Wall mount casing
– Option ”w”
Module is screwed on a mounting plate for
install in a cabinet. This option includes screw
terminal block for connection.
Chassis mount casing
– Option ”cha” Option is not available for all series.
Please request
Din rail
– Option ”din” Option is not available for all series.
Please request
Mechanical strength
– Option ”ms” Rugged construction for harsh environment
Extended temperature range – Option ”c” The unit is designed and tested for operation at
an ambient temp. range of –40°C to +75°C
Further options and combinations on request
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 8 of 13

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]