JANS1N5809 Ver la hoja de datos (PDF) - Microsemi Corporation
Número de pieza
componentes Descripción
Lista de partido
JANS1N5809 Datasheet PDF : 5 Pages
| |||
1N5807, 1N5809 and 1N5811
MECHANICAL and PACKAGING
• CASE: Hermetically sealed voidless hard glass with tungsten slugs.
• TERMINALS: Tin/lead (Sn/Pb) or RoHS compliant matte/tin (commercial grade only) over nickel plate over copper.
• MARKING: Body coated in blue with part number.
• POLARITY: Cathode indicated by band.
• TAPE & REEL option: Standard per EIA-296. Consult factory for quantities.
• WEIGHT: 750 milligrams.
• See Package Dimensions on last page.
PART NOMENCLATURE
Reliability Level
JAN = JAN Level
JANTX = JANTX Level
JANTXV = JANTXV Level
JANS = JANS Level
Blank = Commercial
JAN 1N5807 (e3)
RoHS Compliance
e3 = RoHS compliant (available
on commercial grade only)
Blank = non-RoHS compliant
JEDEC type number
(See Electrical Characteristics
table)
Symbol
V BR
V RWM
IO
VF
IR
C
t rr
SYMBOLS & DEFINITIONS
Definition
Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.
Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature
range.
Average Rectified Output Current: Output current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave input and
a 180 degree conduction angle.
Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.
Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage and temperature.
Capacitance: The capacitance in pF at a frequency of 1 MHz and specified voltage.
Reverse Recovery Time: The time interval between the instant the current passes through zero when changing from
the forward direction to the reverse direction and a specified recovery decay point after a peak reverse current occurs.
ELECTRICAL CHARACTERISTICS @ TA = 25 ºC unless otherwise stated
TYPE
1N5807
1N5809
1N5811
BREAKDOWN
VOLT AGE
(MIN.)
@ 100 µA
V (BR)
Volts
60
110
160
MAXIMUM FORWARD
VOLT AGE
@ 4 A (8.3 ms pulse)
V FM
25 oC
0.875
0.875
0.875
Volts
125 oC
0.800
0.800
0.800
REVERSE
CURRENT
(MAX.)
@ V RWM
IR
µA
25 oC 125 oC
5
525
5
525
5
525
SURGE
CURRENT
(MAX)
I FSM
(Note 1)
Amps
125
125
125
REVERSE
RECOVERY
TIME (MAX)
trr
(Note 2)
ns
30
30
30
NOTES: 1. T A = 25 oC @ IO = 3.0 A and V RWM for ten 8.3 ms surges at 1 minute intervals.
2. IF = 1.0 A, IRM = 1.0 A, IR(REC) = 0.10 A and di/dt = 100 A/µs min.
T4-LDS-0168, Rev. 3 (120776)
©2012 Microsemi Corporation
Page 2 of 5
Share Link: 