RTL8201CP Ver la hoja de datos (PDF) - Realtek Semiconductor

Número de pieza

componentes Descripción

Lista de partido

RTL8201CP

SINGLE-CHIP/SINGLE-PORT 10/100M FAST ETHERNET PHYCEIVER (With Auto Crossover)

Realtek Semiconductor 

RTL8201CP

Datasheet

COPYRIGHT

©2004 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means without the written permission of Realtek Semiconductor Corp.

DISCLAIMER

Realtek provides this document “as is”, without warranty of any kind, neither expressed nor implied,

including, but not limited to, the particular purpose. Realtek may make improvements and/or changes in

this document or in the product described in this document at any time. This document could include

technical inaccuracies or typographical errors.

TRADEMARKS

Realtek is a trademark of Realtek Semiconductor Corporation. Other names mentioned in this document

are trademarks/registered trademarks of their respective owners.

USING THIS DOCUMENT

This document is intended for the software engineer’s reference and provides detailed programming

information.

Though every effort has been made to ensure that this document is current and accurate, more information

may have become available subsequent to the production of this guide. In that event, please contact your

Realtek representative for additional information that may help in the development process.

REVISION HISTORY

Revision

1.0

1.1

Release Date

2003/06/09

2003/09/26

1.2

2004/01/20

1.21

2004/10/12

Summary

First release.

Minor cosmetic changes.

Modify LED Pin behavior.

Add LED multi-mode definition (7.5 LED and PHY Address

Configuration, page 19).

Add Power dissipation info (Table 31).

Bit <0:8> default setting changed to 0 (Table 9).

Bit <0:13> default setting changed to 0 (Table 9).

Bit <5:7> default setting changed to 0 (Table 14).

Bit <17:5> default setting changed to 1 (Table 17).

Bit <25:0> default setting changed to 0 (Table 20).

Bit <25:1> default setting changed to 0 (Table 20).

Bit <25:11~7> default setting changed to 00001 (Table 20).

Package additions. See section 10, Ordering Information, page 33.

Single-Chip/Port 10/100 Fast Ethernet PHYceiver

ii

Track ID: JATR-1076-21 Rev. 1.21

Share Link: