88E3016 Ver la hoja de datos (PDF) - Marvell Semiconductor

Número de pieza

componentes Descripción

Lista de partido

88E3016

Integrated 10/100 Fast Ethernet Transceiver

Marvell Semiconductor 

88E3016

Integrated 10/100 Fast Ethernet Transceiver

OVERVIEW

The Marvell® 88E3016 device is the fourth generation

Marvell® DSP-based physical layer transceiver for

Fast Ethernet applications. The device contains all the

active circuitry to convert data streams to and from a

Media Access Controller (MAC) and the physical

media. The 88E3016 device incorporates IEEE 802.3u

Auto-Negotiation in support of both 100BASE-TX and

10BASE-T networks over twisted-pair cable in full-

duplex or half-duplex mode.

The 88E3016 device supports the Reduced Gigabit

Media Independent Interface (RGMII).

The 88E3016 device features a mode of operation

supporting IEEE compliant 100BASE-FX fiber-optic

networks. Additionally, the 88E3016 device imple-

ments Far-End Fault Indication (FEFI) in order to pro-

vide a mechanism for transferring information from the

local station to the link partner that indicates a remote

fault has occurred in 100BASE-FX mode.

The 88E3016 device features the Marvell Virtual Cable

Tester® (VCT™) technology, which enables IT manag-

ers and networking equipment manufacturers to

remotely analyze the quality and characteristics of the

attached cable plant.

The 88E3016 device uses advanced mixed-signal pro-

cessing and power management techniques for

extremely low power dissipation and high port count

system integration. The 88E3016 device is manufac-

tured in an all CMOS process and packaged in a 64-

pin QFN package.

FEATURES

• IEEE 802.3 compliant 100BASE-TX and

10BASE-T ports

• Reduced Gigabit Media Independent Interface

(RGMII)

• Virtual Cable Tester® (VCT™) Technology

• PECL interface supporting 100BASE-FX applica-

tions

• Automatic MDI/MDIX crossover for 10BASE-T

and 100BASE-TX

• Jumbo frame support to 10 Kbytes with up to

±150 ppm clock frequency difference

• IEEE 802.3u Auto-Negotiation support for auto-

matic speed and duplex selection

• Far-End Fault Indication (FEFI) support for

100BASE-FX applications

• Supports 802.3ah Unidirectional Enable

• Energy detect feature

• Baseline wander correction

• Auto-Calibration for MAC Interface outputs

• COMA Mode support

• Flexible serial management interface (MDC/

MDIO) for register access

• Programmable interrupt to minimize polling

• IEEE 1149.1 Standard Test Access Port and

boundary scan compatible

• Supports three (3) LEDs per port

• 0.15 μm standard digital CMOS process

• 64-pin QFN 9 mm x 9 mm package

Copyright © 2008 Marvell

January 4, 2008, Advance

Document Classification: Proprietary Information

Doc. No. MV-S103164-00, Rev. A

Page 3

Share Link: