BD6583MUV-A Ver la hoja de datos (PDF) - ROHM Semiconductor

Número de pieza

componentes Descripción

Lista de partido

BD6583MUV-A

White Backlight LED Driver for Medium to Large LCD Panels (Switching Regulator Type)

ROHM Semiconductor 

BD6583MUV-A

Technical Note

●Description of Functions

1) PWM current mode DC/DC converter

While BD6583MUV-A is power ON, the lowest voltage of LED1, 2, 3, 4, 5, 6 is detected, PWM duty is decided to be

0.5Vand output voltage is kept invariably. As for the inputs of the PWM comparator as the feature of the PWM current

mode, one is overlapped with error components from the error amplifier, and the other is overlapped with a current sense

signal that controls the inductor current into Slope waveform to prevent sub harmonic oscillation. This output controls

external Nch Tr via the RS latch. In the period where external Nch Tr gate is ON, energy is accumulated in the external

inductor, and in the period where external Nch Tr gate is OFF, energy is transferred to the output capacitor via external

SBD.BD6583MUV-A has many safety functions, and their detection signals stop switching operation at once.

2) Soft start

BD6583MUV-A has soft start function.

The soft start function prevents large coil current.

Rush current at turning on is prevented by the soft start function.

After RSTB is changed L H, when PWMPOW is changed L H, soft start becomes effective for within 1ms and soft start

doesn't become effective even if PWMPOW is changed L H after that.

And, when the H section of PWMPOW is within 1ms, soft start becomes invalid when PWMPOW is input to H more than

three times. The invalid of the soft start can be canceled by making RSTB  L.

3) FAILSEL pin

When the error condition occurs, boost operating is stopped by the protection function, and the error condition is avoided.

On that occasion, the way to stop of boost operating by the protection function can be selected with FAILSEL pin. Details

are as shown in Fig.29, 30.

After power ON, when the protection function is operating under about 1ms have passed, the stop state of the boost

operating can be held through FAILSEL is H, the stop state can reset through RSTB is L.

And, boost operating is stopped when the protection function is operating through FAILSEL is L, but when the protection

function becomes un-detect, boost operating is started again. It never keeps holding the stop state of boost operating.

In PWM control by PWMDRV can’t use this function.

When it is off over 10ms on PWM control by PWMPOW using this function, it may be stopped the boost

operating as over current protection work at off on PWMPOW=L.

Object of protect function is as shown below.

・ Over-voltage protection

・ External SBD open detect

・ Thermal shutdown

・ LED terminal over-voltage protection

・ Over current limit

<FAILSEL=H>

RSTB

“H”

FAILSEL

about 1ms

un-operating range

Protection

function

Boost off

operating

un-detection

detection

un-detection

normal operating

boost stop

<FAILSEL=L>

RSTB

FAILSEL

about 1ms

“L” un-operating range

Protection

function

un-detectio

Boost off

operating

normal operating

detection

un-detection

boost stop

normal

operating

off

off

< When it is off on PWMPOW>

normal operating

RSTB

PWMDRV

PWMPOW

Output

voltage

Coil current

FAILSEL

function

invalid

< When it is off on RSTB>

normal

RSTB

PWMDRV

PWMPOW

Output

voltage

Coil current

FAILSEL

function

invalid

valid

Fig.29 FAILSEL operating description

Fig.30 FAILSEL=H light off control

www.rohm.com

© 2011 ROHM Co., Ltd. All rights reserved.

8/26

2011.06 - Rev.C

Share Link: