JANTX2N6806 Ver la hoja de datos (PDF) - TE Connectivity

Número de pieza

componentes Descripción

Lista de partido

JANTX2N6806

SEMICONDUCTOR DEVICE, FIELD EFFECT TRANSISTOR, P-CHANNEL, SILICON

TE Connectivity 

MIL-PRF-19500/562C

5. PACKAGING

5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order (see 6.2). When

actual packaging of material is to be performed by DoD personnel, these personnel need to contact the responsible packaging activity to

ascertain requisite packaging requirements. Packaging requirements are maintained by the Inventory Control Points' packaging activity

within the Military Department or Defense Agency, or within the Military Departments' System Command. Packaging data retrieval is

available from the managing Military Departments' or Defense Agency's automated packaging files, CD-ROM products, or by contacting

the responsible packaging activity.

6. NOTES

(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)

6.1 Notes. The notes specified in MIL-PRF-19500 are applicable to this specification.

6.2 Acquisition requirements. Acquisition documents must specify the following:

a. Issue of DODISS to be cited in the solicitation (see 2.2.1).

b. The lead finish as specified (see 3.4.1).

c. Type designation and quality assurance level.

c. Packaging requirements (see 5.1).

e. For die acquisition, the JANHC or JANKC letter version shall be specified (see figures 2 and 3).

6.3 Qualification. With respect to products requiring qualification, awards will be made only for products which are, at the time of

award of contract, qualified for inclusion in Qualified Manufacturer's List QML-19500 whether or not such products have actually been so

listed by that date. The attention of the contractors is called to these requirements, and manufacturers are urged to arrange to have the

products that they propose to offer to the Federal Government tested for qualification in order that they may be eligible to be awarded

contracts or purchase orders for the products covered by this specification. Information pertaining to qualification of products may be

obtained from Defense Supply Center Columbus, DSCC-VQE, Columbus, OH 43216.

6.4 Cross-reference and complement list. Parts from this specification may be used to replace the following commercial Part or

Identifying Number (PIN's). The term Part or Identifying Number (PIN) is equivalent to the term part number which was previously used

in this specification.

Preferred types

Commercial types

Complement

2N6804

IRF9130, IRF9131, IRF9132, IRF9133

2N6756

2N6806

IRF9230, IRF9231, IRF9232, IRF9233

2N6758

6.5 Suppliers of JANHC and JANKC die. The qualified die suppliers with the applicable letter version (example JANHCA2N6804) will

be identified on the QML.

18

Share Link: