USB2512I Ver la hoja de datos (PDF) - SMSC -> Microchip

Número de pieza

componentes Descripción

Lista de partido

USB2512I

Industrial Temperature Rated USB 2.0 High-Speed 2-Port Hub Controller

SMSC -> Microchip 

Industrial Temperature Rated USB 2.0 High-Speed 2-Port Hub Controller

Datasheet

Chapter 3 Pin Descriptions

3.1

PIN Descriptions

This section provides a detailed description of each signal. The signals are arranged in functional

groups according to their associated interface.

The “N” symbol in the signal name indicates that the active, or asserted, state occurs when the signal

is at a low voltage level. When “N” is not present before the signal name, the signal is asserted when

at the high voltage level.

The terms assertion and negation are used exclusively. This is done to avoid confusion when working

with a mixture of “active low” and “active high” signals. The term assert, or assertion, indicates that a

signal is active, independent of whether that level is represented by a high or low voltage. The term

negate, or negation, indicates that a signal is inactive.

Table 3.1 USB2512i Pin Descriptions

SYMBOL

USBUP_DP

USBUP_DM

VBUS_DET

USBDN_DP[2:1]/

&

USBDN_DM[2:1]/

PRTPWR[2:1]

OCS[2:1]_N

RBIAS

QFN-36

EMB

BUFFER

TYPE

DESCRIPTION

UPSTREAM USB INTERFACES

31

IO-U

USB Bus Data

30

These pins connect to the upstream USB bus data signals

(Host port, or upstream hub).

27

I/O12

Detect Upstream VBUS Power

Detects state of Upstream VBUS power. The SMSC Hub

monitors VBUS_DET to determine when to assert the internal

D+ pull-up resistor (signaling a connect event).

When designing a detachable hub, this pin must be connected

to the VBUS power pin of the USB port that is upstream of the

hub.

For self-powered applications with a permanently attached

host, this pin must be connected to 3.3V (typically VDD33).

DOWNSTREAM 2-PORT USB 2.0 INTERFACE

4

IO-U

High-Speed USB Data

2

These pins connect to the downstream USB peripheral devices

3

attached to the hub’s port.

1

16

O12

USB Power Enable

12

Enables power to USB peripheral devices downstream.

Note: The hub supports active high power controllers only!

17

IPU

Over Current Sense

13

Input from external current monitor indicating an over-current

condition.

{Note: Contains internal pull-up to 3.3V supply}

35

I-R

USB Transceiver Bias

A 12.0kΩ (+/- 1%) resistor is attached from ground to this pin

to set the transceiver’s internal bias settings.

Revision 1.92 (11-28-07)

8

DATASHEET

SMSC USB2512i

Share Link: