AFBR-5803Z Ver la hoja de datos (PDF) - Broadcom Corporation

Número de pieza

componentes Descripción

Lista de partido

AFBR-5803Z

FDDI, 100 Mb/s ATM, and Fast Ethernet Transceivers in Low-Cost 1 × 9 Package Style

Broadcom Corporation 

AFBR-5803Z/5803TZ/5803AZ/5803ATZ

Figure 11 Recommended Common Mechanical Layout for SC and ST 1 × 9 Connectored Transceivers

42.0

12.0

0.51

9.53

(NOTE 1)

12.09

24.9

25.4

11.1

0.75

39.12

6.79

25.4

Data Sheet

NOTE 1: MINIMUM DISTANCE FROM FRONT

OF CONNECTOR TO THE PANEL FACE.

Regulatory Compliance

These transceiver products are intended to enable commercial

system designers to develop equipment that complies with the

various international regulations governing certification of

Information Technology Equipment. See the Regulatory

Compliance Table for details. Additional information is

available from your Broadcom sales representative.

Electrostatic Discharge (ESD)

Immunity to ESD damage is important in two cases.

The first case is during handling of the transceiver prior to

mounting it on the circuit board. It is important to use normal

ESD-handling precautions for ESD-sensitive devices. These

precautions include using grounded wrist straps, work

benches, and floor mats in ESD-controlled areas.

The second case to consider is static discharges to the exterior

of the equipment chassis containing the transceiver parts. To

the extent that the duplex SC connector is exposed to the

outside of the equipment chassis, it may be subject to

whatever ESD system level test criteria that the equipment is

intended to meet.

Broadcom

- 10 -

Share Link: