IDT72V3622L10PFG Ver la hoja de datos (PDF) - Integrated Device Technology
Número de pieza
componentes Descripción
Lista de partido
IDT72V3622L10PFG
Integrated Device Technology
IDT72V3622L10PFG Datasheet PDF : 29 Pages
| |||
IDT72V3622/72V3632/72V3642 CMOS 3.3V SyncBiFIFOTM
256 x 36 x 2, 512 x 36 x 2, 1,024 x 36 x 2
COMMERCIAL TEMPERATURE RANGE
ABSOLUTE MAXIMUM RATINGS OVER OPERATING
TEMPERATURE RANGE (Unless otherwise noted)(1)
Symbol
Rating
Commercial
Unit
VCC
Supply Voltage Range
–0.5 to +4.6
V
VI(2)
Input Voltage Range
VO(2)
Output Voltage Range
IIK
Input Clamp Current (VI < 0 or VI > VCC)
IOK
Output Clamp Current (VO = < 0 or VO > VCC)
IOUT
Continuous Output Current (VO = 0 to VCC)
ICC
Continuous Current Through VCC or GND
–0.5 to VCC+0.5
V
–0.5 to VCC+0.5
V
±20
mA
±50
mA
±50
mA
±400
mA
TSTG
Storage Temperature Range
–65 to 150
οC
NOTES:
1. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these
or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute maximum rated conditions for extended periods may affect
device reliability.
2. The input and output voltage ratings may be exceeded provided the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min. Typ. Max. Unit
VCC(1) Supply Voltage
3.0
3.3
3.6
V
VIH
High-Level Input Voltage
2
— VCC+0.5 V
VIL
Low-Level Input Voltage
—
—
0.8
V
IOH
High-Level Output Current
—
—
–4
mA
IOL
Low-Level Output Current
—
—
8
mA
TA
Operating Temperature
0
—
70
°C
NOTE:
1. For 10ns (100 MHz operation), Vcc=3.3V +/- 0.15V, TA = 0° to +70°C; JEDEC JESD8-A compliant.
ELECTRICAL CHARACTERISTICS OVER RECOMMENDED
OPERATING TEMPERATURE RANGE (Unless otherwise noted)
IDT72V3622
IDT72V3632
IDT72V3642
Commercial
tCLK = 10(1), 15ns
Symbol
Parameter
Test Conditions
Min. Typ.(2) Max. Unit
VOH
Output Logic "1" Voltage
VCC = 3.0V,
IOH = –4 mA
2.4
—
—
V
VOL
Output Logic "0" Voltage
VCC = 3.0V,
IOL = 8 mA
—
—
0.5
V
ILI
Input Leakage Current (Any Input)
VCC = 3.6V,
VI = VCC or 0
—
—
±10
μA
ILO
Output Leakage Current
VCC = 3.6V,
VO = VCC or 0
—
—
±10
μA
ICC2(3)
Standby Current (with CLKA and CLKB running)
VCC = 3.6V,
VI = VCC - 0.2V or 0
—
—
5
mA
ICC3(3) Standby Current (no clocks running)
VCC = 3.6V,
VI = VCC - 0.2V or 0
—
—
1
mA
CIN(4)
Input Capacitance
VI = 0,
f = 1 MHz
—
4
—
pF
COUT(4) OutputCapacitance
VO = 0,
f = 1 MHZ
—
8
—
pF
NOTES:
1. For 10ns speed grade only: VCC = 3.3V +/- 0.15V, TA = 0° to +70°C; JEDEC JESD8-A compliant.
2. All typical values are at VCC = 3.3V, TA = 25°C.
3. For additional ICC information, see Figure 1, Typical Characteristics: Supply Current (ICC) vs. Clock Frequency (fS).
4. Characterized values, not currently tested.
5. Industrial temperature range is available by special order.
6
Share Link: