T591V227M2R5ATE009(2016) Ver la hoja de datos (PDF) - KEMET
Número de pieza
componentes Descripción
Lista de partido
T591V227M2R5ATE009
(Rev.:2016)
(Rev.:2016)
KEMET
T591V227M2R5ATE009 Datasheet PDF : 18 Pages
| |||
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Surge Voltage
Surge voltage is the maximum voltage (peak value) which may be applied to the capacitor.
The surge voltage must not be applied for periodic charging and discharging in the course of normal operation and cannot
be part of the application voltage.
Surge voltage capability is demonstrated by application of 1,000cycles at relevant voltage at 105ºC and 125ºC.
The parts are charged through a 33 Ohm resistor for 30 seconds and then discharged though a 33 Ohm resistor for each
cycle.
Rated Voltage (V)
Surge Voltage (V)
–55ºC to 105ºC
2, 5
3, 3
6, 3
8, 2
10
13, 0
16
20, 8
20
26, 0
25
32, 5
35
45, 5
50
65,
Derated Voltage (V) Derated Surge Voltage (V)
Up to 125ºC
1, 7
2, 2
4, 2
5, 5
6, 7
8, 7
10, 7
13, 9
13, 4
17, 4
16, 8
21, 8
23, 5
30, 5
33, 5
43, 6
Reverse Voltage
Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong
polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below
table.
Temperature
25°C
55°C
85°C
105°C
125°C*
Permissible Transient Reverse Voltage
15% of Rated Voltage
10% of Rated Voltage
5% of Rated Voltage
3% of Rated Voltage
1% of Rated Voltage
*For series rated to 125°C
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 9/16/2016 9
Share Link: