LC86E7248 Ver la hoja de datos (PDF) - SANYO -> Panasonic

Número de pieza

componentes Descripción

Lista de partido

LC86E7248

8-Bit Single Chip Microcontroller with the UVEPROM

SANYO -> Panasonic 

LC86E7248

How to use

(1) Specification of option

Programming data for PROM of the LC86E7248 is required.

Debugged evaluation file (EVA file) must be converted to an INTEL-HEX formatted file (HEX file) with file converter

program, EVA2HEX.EXE. The HEX file is used as the programming data for the LC86P6548.

(2) How to program for the EPROM

The LC86E7248 can be programmed by EPROM programmer with attachment ; W86EP7248Q

• Recommended EPROM programmer

Productor

Advantest

Andou

AVAL

Minato electronics

EPROM programmer

R4945, R4944, R4943

AF-9704

PKW-1100, PKW-3000

MODEL1890A

• “27512 (Vpp=12.5V) Intel high speed programming” mode available. The address must be set to “0 to 0FFFFH” and a

jumper (DASEC) must be set to ‘OFF’ at programming.

(3) How to use the data security function

“Data security” is the disabled function to read the data of the EPROM.

The following is the process in order to execute the data security.

1. Set ‘ON’ the jumper of attachment.

2. Program again. Then EPROM programmer displays the error. The error means normally activity of the data

security. It is not a trouble of the EPROM programmer or the LSI.

Notes

• Data security is not executed when the data of all address have ‘FFH’ at the sequence 2 above.

• The programming by a sequential operation “BLANK=>PROGRAM=>VERIFY” cannot be executed data security at the

sequence 2 above.

• Set to ‘OFF’ the jumper after executing the data security.

(4) How to eliminate

The programming data can be erased by using the EPROM eraser.

(5) Shielding

The UVEPROM (ultraviolet erasable programmable ROM) is in it. Put the seal on the window in use.

Data security

W86EP7248Q

Not data security

No.6749-4/19

Share Link: