General Description
The ACT2708 is an expandable first-in, first-out memory organized as 64 words by 9 bits. An 85 MHz shift-in and 60 MHz shift-out typical data rate makes it ideal for high-speed applications. It uses a dual port RAM architecture with pointer logic to achieve the high speed with negligible fall through time.
Separate Shift-In (SI) and Shift-Out (SO) clocks control the use of synchronous or asynchronous write or read. Other controls include a Master Reset (MR) and Output Enable (OE) for initializing the internal registers and allowing the data outputs to be 3-STATE. Input Ready (IR) and Output Ready (OR) signal when the FIFO is ready for I/O operations. The status flags HF and FULL indicate when the FIFO is full, empty or half full.
The FIFO can be expanded to provide different word lengths by tying off unused data inputs.

FEATUREs
■ 64-words by 9-bit dual port RAM organization
■ 85 MHz shift-in, 60 MHz shift-out data rate, typical
■ Expandable in word width only
■ TTL-compatible inputs
■ Asynchronous or synchronous operation
■ Asynchronous master reset
■ Outputs source/sink 8 mA
■ 3-STATE outputs
■ Full ESD protection
■ Input and output pins directly in line for easy board layout
■ TRW 1030 work-alike operation

APPLICATIONs
• High-speed disk or tape controllers
• A/D output buffers
• High-speed graphics pixel buffer
• Video time base correction
• Digital filtering