Description
The 74LVC541A is an octal buffer/driver is designed for driving bus lines or buffer memory address registers. The 3-state control gate is a 2-input AND gate with active-low inputs so that, if either output enable (OE1 or OE2) input is high, all eight outputs are in the high-impedance state.
These devices feature inputs and outputs on opposite sides of the package that facilitate printed circuit board layout. The device is designed for operation with a power supply range of 1.65V to 3.6V.
FEATUREs
• Supply Voltage Range from 1.65V to 3.6V
• Sinks or Sources 24mA at VCC = 3V
• CMOS Low Power Consumption
• IOFF Supports Partial-Power Down Operation
• Inputs or Outputs Accept Up to 5.5V
• Inputs Can Be Driven by 3.3V or 5V Allowing for Mixed Voltage Applications
• Schmitt Trigger Action at All Inputs
• Typical VOLP (Quiet Output Ground Bounce) less than 0.8V with VCC = 3.3V and TA = +25°C
• Typical VOHV (Quiet Output Dynamic VOH) greater than 2.0V with VCC = 3.3V and TA = +25°C
• ESD Protection Tested per JESD 22
◾ Exceeds 200-V Machine Model (A115)
◾ Exceeds 2000-V Human Body Model (A114)
◾ Exceeds 1000-V Charged Device Model (C101)
• Latch-Up Exceeds 250mA per JESD 78, Class I
• All devices are:
◾ Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
◾ Halogen and Antimony Free. “Green” Device (Note 3)
APPLICATIONs
• General Purpose Logic
• Bus Driving
• Power Down Signal Isolation
• Wide array of products such as:
◾ PCs, Notebooks, Netbooks, Ultrabooks
◾ Networking Computer Peripherals, Hard Drives, CD/DVD ROM
◾ TV, DVD, DVR, set top box