Overview
The AK2363 is a radio signaling LSI device into which an MSK modem and a DTMF Receiver are integrated on a single chip.
The MSK modem supports 1200 and 2400 bit/s, and the demodulator has a 16-bit frame pattern detection function that allows any settings. When the signal-to-noise (S/N) ratio is 12dB, the BER characteristic at 1200 bit/s is 5.0E-06, and the BER characteristic at 2400 bit/s is 1.0E-04.
The DTMF Receiver operates in two modes: Normal mode (AGD Disable) indicating input signal detection levels ranging from -27dBx to 0dBx and high sensitivity mode (AGC Enable) in which the receiver operates at –40dBx to 0dBx.

FEATUREs
□ DTMF Receiver including an AGC circuit
□ Built-in MSK modem allowing selection from 1200 and 2400 bit/s
□ Programmable modem frame detection pattern
□ Built-in 3.6864MHz oscillator circuit
□ Support of external clocks with frequencies twice, three times, and four times higher than 3.6864MHz
□ Operating voltage range: 2.6V to 3.7V
□ Operating temperature range: -40°C to +85°C
□ Package: 24-pin QFNJ (4.0 x 4.0 x 0.75mm, 0.5mm pitch)