[Apacer Technology Inc.]

General Description
As the demand of reliable and high-performance data storage in a small form factor increases, Apacer’s Micro SD card 3.0 is designed specifically for multiple applications by offering high endurance, reliability, and agility, where extreme flexibility, endurance, data integrity, and exceptionally transmission are required.
The Micro SD 3.0 card fully complies with SD Card Association standard. The Command List is compatible with [Part 1 Physical Layer Specification Ver3.1 Final] definitions, while the Card Capacity of Non-secure Area, Secure Area supports [Part 3 Security Specification Ver3.0 Final] Specifications. The card allows selection of either SD or SPI mode for compatibility in data communication. To provide higher transfer rate, the card can extend to 100MHz clock frequency.
The card also comes with endurance features for data error detection and correction, write protection, and password protection.

FEATURES:
● Fully compatible with SD Card Association specifications
   - Part 1, Physical Layer Specification, Version 3.1 Final
   - Part 3, Security Specification, Version 3.0 Final
● Capacity range
   - 4, 8, 16, 32 GB
● Performance*
   - Sustained Read: Up to 19 MB/sec
   - Sustained Write: Up to 12 MB/sec
● SD-protocol compatible
● Supports SD SPI mode
● Backward compatible with 2.0
● NAND Flash Type: MLC
● Operating frequency: up to 100 MHz
● Intelligent endurance design
   - Built-in advanced ECC algorithm
   - Wear-leveling
   - Flash bad-block management
   - Built in write protect
● Temperature ranges
   - Operating temperature: -25 ~ +85°C
   - Storage temperature: -40°C ~ +85°C
● Operating voltage: 2.7V ~ 3.6V
● Power consumption*
   - Operating: 47 mA
   - Standby: 150 uA
● Physical dimension : 15mm(L) x 11mm(W) x 1mm(H)
● RoHS Recast Compliant (2011/65/EU)