SIL type SSR with 9mm thickness controls up to 3A

FEATURES
1. Slim with 9 mm .354 inch thickness
   The thin type (45 mm long × 24 mm high
   × 9 mm wide) (1.772×.945×.354 inch)
   permits high density mounting.
2. Excellent in noise resistance
   Since the input and output are insulated
   by the phototriac coupler, the noise on
   the output side is not fed back to the input
   side.
3. Snubber circuit integrated
   The snubber circuit is integrated to
   prevent malfunction caused by the rapid
   rise of the voltage on the output side,
   such as inductive load and noise.
4. Zero-cross and random types are available.
   The zero-cross type generates minimal
   noise by suppressing occurrence of radio
   frequency interference (RFI) and electro
   magnetic interference (EMI).
   The random type features a short
   operation time which permits phase
   control.
5. High dielectric strength: 3,000 V AC
   (between input and output)
6. Two kinds of terminals distance are
   available. (5.08 mm and 7.62 mm) (.200 and .300 inch)
7. High reliability, long life and maintenance-free

TYPICAL APPLICATIONS
1. Most suitable as drivers for small
   size AC motors, solenoids, solenoid
   valves and so on.
2. Copying equipment
3. Air conditioners
4. Industrial equipment such as NC
   machines, sequencers, robots, etc.