Description
Atmels AT71201M is a full-frame sensor based on charge-coupled device (CCD) technology. It can be used in a wide range of applications thanks to operating mode flexibility, very high definition and high dynamic range.
The nominal photosensitive area is made up of 4096 x 4096 useful pixels and is split into four independent zones that are driven separately by four independent four-phase clock sets. Thus the sensor can be used in up to 12 main modes.
FEATUREs
• Full-Frame Image Sensor 4096 x 4096 Pixels
• 11 µm x 11 µm Photo-MOS Pixel with 100% Aperture
• Image Zone: 45 x 45 mm
• Frame Readout Through One, Two or Four Outputs
• Data Rates Up to 4 x 40 MHz (Compatibility with 7, 4 Frames/Second)
• True 12-bit High Dynamic Range
• Very Low Readout Noise
• Very Low Dark Current (MPP Mode)
• Optimized Resolution and Responsivity in the 400 - 1100 nm Spectrum
• On-chip Thermometer for Each Quarter
• Additional Full-Frame Operating Modes:
– 4/3 Aspect Ratio: 4096 x 3072
– 2/1 Aspect Ratio: 4096 x 2048
– Binning 2 x 2 Pixels (Format 2048 x 2048 Pixels of 22 x 22 µm)
– Binning 4 x 4 Pixels (Format 1024x 1024 Pixels of 44 x 44 µm)
• On-request Frame Transfer Architecture:
– 2048 Active Lines, One Memory Zone with Frame Readout Through One or Two Outputs
– 2048 Active Lines, Two Memories Zones with Frame Readout Through Two or Four Outputs
APPLICATIONs
Flexibility and performance makes this device suitable for digital photography, graphic arts, medical or industrial applications and scientific analysis.