General Description
The AVXX32E-B is a series of single-chip synthesizing CMOS VLSI which synthesizes voice by LOG_PCM algorithm. Table programming and shared multiple I/O pins make the applications flexible. Powerful functions and pure speech architecture make the AVXX32E-B series able to best fit most speech applications and a best cost/performance ratio as a result.
The programming of the AVXX32E-B series is first to define words. Each word contains voice data (or mute length), output method, pitch (if pitch control enabled), and volume (if volume control enabled). Assemble the words into sentences first, and then the programmer can assign the sentences to the keys corresponding to the user inputs.

FEATUREs
• Operating voltage: 2.4V~5.0V
• One single-key can implement play-all, play-next and random function. Maximum play count is 32.
• 4-column inputs and 3-row outputs can implement 4x4-matrix function.
• Each input can implement looping function.
• Single-key and 4-column inputs can be last-key priority for stand-alone input or first-key priority.
• Each input trigger can select trigger mode: (For OKY, TG0, TG1, TG2, TG3) Edge/Level, Hold/Unhold, Retrigger/Irretrigger.
• Each input trigger can select its own debounce time:
   Fast debounce: < 200us;
   Slow debounce: ~16ms (S.R.=6.0kHz)
• Support bouncing trigger solution for retrigger application. (Second trigger force to retrigger and slow debounce.)
• Maximum table entries are 460*8.
• Word count is only limited by ROM capacity.
• 4 output ports for Status or Led application:
   - OP_A Status:
      Busy_high ,DC_low, Stop_high,DC_high
      LED: +Fast,+Slow, Dyn(7/10), Off
   - OP_B Status:
      Busy_high, DC_low, Stop_high, DC_high
      LED: -Fast, -Slow, Dyn(9/10), On
   - OP_C Status: Busy_high, DC_low,
      Busy_low, DC_high
      LED: +Fast, +Slow, On, Off
   - OP_D Status0: Busy_high, DC_low
      Status1: Busy_low, DC_high
• Each output can specify its initial state (High or Low)
• Outputs can be set as constant current regardless of the supply voltage varied.
• Two PWM playing ports. Drive speaker or buzzer directly (For tone only).
• One DAC playing port, together with external bipolar to drive speaker. Ramp up/down is automatic.
• For DAC, AVXX32E-B series supports 8 levels of current control to offer flexible choises of corresponding BJT.
• Four-level volume control is provided for DAC or PWM output.
• Eight-pitch control is provided.
• Voice length: 21, 32, 43, 65 and 87 seconds.
  (ROM capacity : 131072*5, 196608*5, 262144*5, 393216*5 and 524288*5 bits)
• Voice algorithm: 5-bits LOG_PCM
• External resister or built-in resister for system frequency by bonding option on the same pad.
• Sixteen default sampling frequencies are supported. The default frequencies can be changed by an external applying resistor.
• Support single key play on/off. (For OKY, TG0, TG1)
• Programmable pull-high, pull-low or floating input. (For OKY, TG0, TG1)