Features :
• 2CHs for current driving-type BTL drivers to drive two-axis actuators
• 1CH for a voltage driving-type BTL driver for a feed motor
4-ch driver comprising of 1CH for a voltage driving-type BTL driver for a loading motor
• A wide dynamic range (PreVcc=12V, PVcc=5V, 4.0V(Typ.) when RL=8Ω)
• The pre-part + feed motor part, the loading motor part, and the actuator part are
provided with power supplies independently and its low voltage operation achieves
an efficient drive.
• A built-in level shift circuit
• A built-in thermal shutdown circuit is installed
• A built-in standby function installed.
<Two-axis Actuator Driver>
The current feedback technique can reduce the current phase shift caused by the load
inductance.
<Feed Motor Driver>
A general op-amp connected to the input terminal helps compute additions of
differential inputs or signals.
<Loading Driver>
A tri-state logic input is used to determine a forward or reverse operation.
It can be used as a linear BTL driver.