10/100BASE-TX/FX HEX-Φ™ TRANSCEIVER
The Broadcom® BCM5226 is a single-chip device containing six independent Fast Ethernet transceivers. Each performs all the physical layer interface functions for 100BASE-TX full-duplex or half-duplex Ethernet on Category 5 twisted-pair cable and 10BASE-T full or halfduplex Ethernet on Category 3, 4 or 5 cable. Each port may also be configured for 100BASE-FX full or half-duplex transmission over fiberoptic cabling when paired with an external fiber-optic line transceiver.
FEATURES
• Single-chip six-port Fast Ethernet transceiver
• HP Auto-MDIX
• Low-power 2.5V CMOS technology
• Compatible with 2.5V I/O and 3.3V I/O
• Reduced Media Independent Interface (RMII)
• Serial Media Independent Interface (SMII)
• Fully integrated digital adaptive equalization
• On-chip multimode transmit waveshaping
• Edge-rate control eliminates external filters
• Integrated baseline wander correction
• Full-duplex support
• Twisted-pair or fiber support on any or all ports
• Interrupt output capability
• Loopback mode for diagnostics
• 160-pin PQFP (BCM5226R)
• 128-pin PQFP (BCM5226S)
• Proven Broadcom proprietary DSP Digi-Φ™ architecture
SUMMARY OF NENEFITS
• Target usage: Fast Ethernet switches.
• Low power < 300 milliwatts per port.
• Auto-MDIX detects and corrects cabling errors.
• Provides robust performance over a broad range of operating conditions.
• Single-chip device contains six independent Fast Ethernet transceivers.
• Performs all physical layer interface functions for 100BASETX full-duplex or half-duplex Ethernet on Category 5 twistedpair cable and 10BASE-T full- or half-duplex Ethernet on Category 3, 4, or 5 cable.
• Permits transmission over fiber-optic cabling when paired with an external fiber-optic transceiver.
• Compliant with IEEE 802.3 standard.
• IEEE 1149.1 (JTAG) scan chain support.