PSoC® Functional Overview
The PSoC family consists of on-chip controller devices, which are designed to replace multiple traditional microcontroller unit (MCU)-based components with one, low cost single-chip programmable component. A PSoC device includes configurable analog and digital blocks, and programmable interconnect. This architecture allows the user to create customized peripheral configurations, to match the requirements of each individual application. Additionally, a fast CPU, Flash program memory, SRAM data memory, and configurable I/O are included in a range of convenient pinouts.

FEATUREs
■ Powerful Harvard-architecture processor
   ❐ M8C CPU with a max speed of 24 MHz
■ Operating Range: 1.71 V to 5.5 V
   ❐ Standby Mode 1.1 μA (Typ)
   ❐ Deep Sleep 0.1 μA (Typ)
■ Operating Temperature range: –40 °C to +85 °C
■ Flexible on-chip memory
   ❐ 8 KB flash, 1 KB SRAM
   ❐ 16 KB flash, 2 KB SRAM
   ❐ 32 KB flash, 2 KB SRAM
   ❐ Read while Write with EEPROM emulation
   ❐ 50,000 flash erase/write cycles
   ❐ In-system programming simplifies manufacturing process
■ Four Clock Sources
   ❐ Internal main oscillator (IMO): 6/12/24 MHz
   ❐ Internal low-speed oscillator (ILO) at 32 kHz for watchdog and sleep timers
   ❐ External 32 KHz Crystal Oscillator
   ❐ External Clock Input
■ Programmable pin configurations
   ❐ Up to 36 general purpose dual mode GPIO (Analog inputs and Digital I/O supported)
   ❐ High sink current of 25 mA per GPIO
      • Max sink current 120 mA for all GPIOs
   ❐ Source Current
      • 5 mA on ports 0 and 1
      • 1 mA on ports 2,3 and 4
   ❐ Configurable internal pull-up, high-Z and open drain modes
   ❐ Selectable, regulated digital I/O on port 1
   ❐ Configurable input threshold on port 1
■ Versatile Analog functions
   ❐ Internal Low-Dropout voltage regulator for high power supply rejection ratio (PSRR)
■ Full-Speed USB
   ❐ 12 Mbps USB 2.0 compliant
   ❐ Eight unidirectional endpoints
   ❐ One bidirectional endpoint
   ❐ Dedicated 512 byte SRAM
   ❐ No external crystal required
■ Additional system resources
   ❐ I2C Slave:
      • Selectable to 50 kHz, 100 kHz, or 400 kHz
   ❐ Configurable up to 12 MHz SPI master and slave
   ❐ Three 16-bit timers
   ❐ Watchdog and sleep timers
   ❐ Integrated supervisory circuit
   ❐ 10-bit incremental analog-to-digital converter (ADC) with internal voltage reference
   ❐ Two general-purpose Comparators
      • 3 Voltage References (0.8 V, 1 V, 1.2 V)
      • Any pin to either comparator inputs
      • Low-power operation at 10 µA
   ❐ One 8-bit IDAC with full scale range of 512 µA
   ❐ One 8-bit Software PWM
■ Development Platform
   ❐ PSoC Designer™ IDE
■ GPIOs and Package options
   ❐ 13 GPIOs - QFN 16
   ❐ 28 GPIOs - QFN 32
   ❐ 34 GPIOs - QFN 48
   ❐ 36 GPIOs - QFN 48