General Description
The DM9161BI is a Industrial-grade physical layer, single-chip, and low power transceiver for
100BASE-TX and 10BASE-T operations. On the media side, it provides a direct interface either to
Unshielded Twisted Pair Category 5 Cable (UTP5) for 100BASE-TX Fast Ethernet, or UTP5/UTP3 Cable for 10BASE-T Ethernet. Through the Media Independent Interface (MII), the DM9161BI connects to the Medium Access Control (MAC) layer, ensuring a high inter operability from different vendors.

FEATUREs
Fully comply with IEEE 802.3 / IEEE 802.3u 10Base-T/100Base-TX, ANSI X3T12 TP-PMD 1995 standard
Support HP MDI/MDI-X auto crossover function(HP Auto-MDIX)
Support Auto-Negotiation function, compliant with IEEE 802.3u
Fully integrated Physical layer transceiver On-chip filtering with direct interface to magnetic transformer
Selectable repeater or node mode
Selectable MII or RMII (Reduced MII) mode for 100Base-TX and 10Base-TX. Selectable MII or GPSI
(7-Wired) mode for 10Base-T
Selectable full-duplex or half-duplex operation
MII management interface with mask able interrupt output capability
Provide Loopback mode for easy system diagnostics
LED status outputs indicate Link/ Activity, Speed10/100 and Full-duplex/Collision. Support Dual-LED optional control
Single low power Supply of 3.3V with an advanced CMOS technology
Very Low Power consumption modes:
●Power Reduced mode (cable detection)
●Power Down mode
●Selectable TX drivers for 1:1 or 1.25:1 transformers for additional power reduction. 1: 1 transformers only when HP Auto-MDIX Enable.
Compatible with 3.3V and 5.0V tolerant I/Os
Pin to pin Compatible with DM9161A.
DSP architecture PHY Transceiver.
Supports Industrial-grade: -40°C.~ +85'°C,
48-pin LQFP 0.18um process