datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga
HOME  >>>  Maxim Integrated  >>> DS21448 PDF

DS21448 Hoja de datos - Maxim Integrated

DS21448 image

Número de pieza
DS21448

componentes Descripción

Other PDF
  no available.

PDF
DOWNLOAD     

page
60 Pages

File Size
699.2 kB

Fabricante
MaximIC
Maxim Integrated MaximIC

GENERAL DESCRIPTION
The DS21448 is a quad-port E1 or T1 line interface unit (LIU) for short-haul and long-haul applications. It incorporates four independent transmitters and four independent receivers in a single 144-pin PBGA or 128-pin LQFP package. The transmit drivers generate the necessary G.703 E1 waveshapes in 75Ω or 120Ω applications and the DSX-1 or CSU line build-outs of 0dB, -7.5dB, -15dB, and -22.5dB for T1 applications.


FEATURES
■ Four Complete E1, T1, or J1 LIUs
■ Supports Long- and Short-Haul Trunks
■ Internal Software-Selectable Receive-Side Termination for 75Ω/100Ω/120Ω
■ 3.3V Power Supply
■ 32-Bit or 128-Bit Crystal-Less Jitter Attenuator Requires Only a 2.048MHz Master Clock for E1 and T1, with the Option to Use 1.544MHz for T1
■ Generates the Appropriate Line Build-Outs With and Without Return Loss for E1, and DSX-1 and CSU Line Build-Outs for T1
■ AMI, HDB3, and B8ZS Encoding/Decoding
■ 16.384MHz, 8.192MHz, 4.096MHz, or 2.048MHz Clock Output Synthesized to Recovered Clock
■ Programmable Monitor Mode for Receiver
■ Loopbacks and PRBS Pattern Generation/ Detection with Output for Received Errors
■ Generates/Detects In-Band Loop Codes, 1 to 16 Bits, Including CSU Loop Codes
■ 8-Bit Parallel or Serial Interface with Optional Hardware Mode
■ Muxed and Nonmuxed Parallel Bus Supports Intel or Motorola
■ Detects/Generates Blue (AIS) Alarms
■ NRZ/Bipolar Interface for Tx/Rx Data I/O
■ Transmit Open-Circuit Detection
■ Receive Carrier Loss (RCL) Indication (G.775)
■ High-Z State for TTIP and TRING
■ 50mARMS Transmit Current Limiter
■ JTAG Boundary Scan Test Port per IEEE 1149.1
■ Meets Latest E1 and T1 Specifications Including ANSI.403-1999, ANSI T1.408, AT&T TR 62411, ITU G.703, G.704, G.706, G.736, G.775, G.823, I.431, O.151, O.161, ETSI ETS 300 166, JTG.703, JTI.431, TBR12, TBR13, and CTR4


APPLICATIONS
    Integrated Multiservice Access Platforms
    T1/E1 Cross-Connects, Multiplexers, and Channel Banks
    Central-Office Switches and PBX Interfaces
    T1/E1 LAN/WAN Routers
    Wireless Base Stations

Page Link's: 1  2  3  4  5  6  7  8  9  10  More Pages 

Número de pieza
componentes Descripción
PDF
Fabricante
3.3V E1/T1/J1 Quad Line Interface
Ver
Dallas Semiconductor -> Maxim Integrated
3.3V E1/T1/J1 Line Interface
Ver
Dallas Semiconductor -> Maxim Integrated
5V E1/T1/J1 Line Interface
Ver
Dallas Semiconductor -> Maxim Integrated
Octal T1/E1/J1 Line Interface Unit
Ver
Cirrus Logic
Quad T1/E1 Line Interface
Ver
Conexant Systems
Octal T1/E1/J1 Line Interface Unit
Ver
Cirrus Logic
OCTAL E1/T1/J1 LINE INTERFACE DEVICE
Ver
PMC-Sierra
5V E1/T1/J1 Line Interface Unit
Ver
Maxim Integrated
Quad T1/E1 Line Interface
Ver
Agere -> LSI Corporation
3.3V E1/T1/J1 Line Interface Design Kit Daughter Card
Ver
Maxim Integrated

Share Link: GO URL

EnglishEnglish Korean한국어 Chinese简体中文 Japanese日本語 Russianрусский

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]