datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga
HOME  >>>  Dallas Semiconductor -> Maxim Integrated  >>> DS26334G PDF

DS26334G(2005) Hoja de datos - Dallas Semiconductor -> Maxim Integrated

DS26334G image

Número de pieza
DS26334G

Other PDF
  lastest PDF  

PDF
DOWNLOAD     

page
115 Pages

File Size
691.7 kB

Fabricante
Dallas
Dallas Semiconductor -> Maxim Integrated Dallas

GENERAL DESCRIPTION
The DS26334 is a 16-channel short/long-haul line interface unit (LIU) that supports E1/T1/J1 from a single 3.3V power supply. A single bill of material can support E1/T1/J1 with minimum external components. Redundancy is supported through nonintrusive monitoring, optimal high impedance modes and configurable 1:1 or 1+1 backup enhancements. An on-chip synthesizer generates the E1/T1/J1 clock rates by a single master clock input of various frequencies. Two clock output references are also offered. The device is offered in a 256-pin TEBGA, the smallest package available for a 16-channel LIU.


FEATURES
16 E1, T1, or J1 Short/Long-Haul Line Interface Units
■ Independent E1, T1 or J1 Selections
■ Software-Selectable Transmit and Receive-Side Impedance Matching
■ Crystal Less Jitter Attenuator
■ Selectable Single-Rail and Dual-Rail Mode and AMI or HDB3/ B8ZS Line Encoding and Decoding
■ Detection and Generation of AIS
■ Digital/Analog Loss of Signal Detection as per T1.231, G.775 and ETSI 300233
■ External Master Clock can be Multiple of 2.048MHz or 1.544MHz for T1/J1 or E1 Operation. This Clock will be Internally Adapted for T1 or E1 Usage.
■ Receiver Signal Level Indicator from -2.5dB to -38dB in T1 Mode and –3dB to –43dB in E1 Mode in 2.5dB Increments
■ Two Built-In BERT Testers for Diagnostics
■ 8-Bit Parallel Interface Support for Intel or Motorola Mode or a 4-Wire Serial Interface
■ Transmit Short Circuit Protection
■ G.772 Nonintrusive Monitoring
■ Receive Monitor Mode Handles Combinations of 14dB to 30dB of Resistive Attenuation Along with 12dB to 30dB of Cable Attenuation
■ Specification Compliance to the Latest T1 and E1 Standards—ANSI T1.102, AT&T Pub 62411, T1.231, T1.403, ITU G.703, G.742, G.775, G.823, ETSI 300 166, and ETSI 300 233
■ Single 3.3V Supply with 5V Tolerant I/O
■ JTAG Boundary Scan as per IEEE 1149.1


APPLICATIONS
    T1 Digital Cross-Connects
    ATM and Frame Relay Equipment
    Wireless Base Stations
    ISDN Primary Rate Interface
    E1/T1/J1 Multiplexer and Channel Banks
    E1/T1/J1 LAN/WAN Routers

Page Link's: 1  2  3  4  5  6  7  8  9  10  More Pages 

Número de pieza
componentes Descripción
PDF
Fabricante
3.3V, 16-Channel, E1/T1/J1 Short- and Long-Haul Line Interface Unit
Ver
Maxim Integrated
SINGLE CHANNEL T1/E1/J1 LONG HAUL/SHORT HAUL LINE INTERFACE UNIT ( Rev : 2019 )
Ver
Integrated Device Technology
QUAD CHANNEL T1/E1/J1 LONG HAUL/SHORT HAUL LINE INTERFACE UNIT
Ver
Integrated Device Technology
SINGLE CHANNEL T1/E1/J1 LONG HAUL/SHORT HAUL LINE INTERFACE UNIT
Ver
Integrated Device Technology
OCTAL CHANNEL T1/E1/J1 LONG HAUL/SHORT HAUL LINE INTERFACE UNIT ( Rev : 2008 )
Ver
Integrated Device Technology
DUAL CHANNEL T1/E1/J1 LONG HAUL/SHORT HAUL LINE INTERFACE UNIT
Ver
Integrated Device Technology
SINGLE CHANNEL T1/E1/J1 LONG HAUL/SHORT HAUL LINE INTERFACE UNIT
Ver
Integrated Device Technology
16-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT ( Rev : 2009 )
Ver
Exar Corporation
OCTAL CHANNEL T1/E1/J1 LONG HAUL/SHORT HAUL LINE INTERFACE UNIT
Ver
Integrated Device Technology
14-CHANNEL T1/E1/J1 LONG-HAUL/SHORT-HAUL LINE INTERFACE UNIT
Ver
Exar Corporation

Share Link: GO URL

EnglishEnglish Korean한국어 Chinese简体中文 Japanese日本語 Russianрусский

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]