Description
The HA-5004/883 current feedback amplifier is a video/wideband amplifier optimized for low gain applications. The design is based on current-mode feedback which allows the amplifier to achieve higher closed loop bandwidth than voltage-mode feedback operational amplifiers. Since feedback is employed, the HA-5004/883 can offer better gain accuracy and lower distortion than open loop buffers. Unlike conventional op amps, the bandwidth and rise time of the HA-5004/883 are nearly independent of closed loop gain. The 100MHz bandwidth at unity gain reduces to only 65MHz at a gain of 10. The HA-5004/883 may be used in place of a conventional op amp with a significant improvement in speed power product.

FEATUREs
• This Circuit is Processed in Accordance to MIL-STD-883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1.
• Slew Rate . . . . . . . . . . . . . . . . . . . . . . 1000V/µs (Min) 1200V/µs (Typ)
• Output Current . . . . . . . . . . . . . . . . . . . . ±80mA (Min) ±100mA (Typ)
• Drives . . . . . . . . . . . . . . . . . . . ±8.0V into 100Ω (Min) ±9.5V into 100Ω (Typ)
• VSUPPLY . . . . . . . . . . . . . . . . . . . . . . . . . ±5V to ±18V
• Thermal Overload Protection and Output Flag
• Bandwidth Nearly Independent of Gain
• Output Enable/Disable

APPLICATIONs
• Unity Gain Video/Wideband Buffer
• Video Gain Block
• High Speed Peak Detector
• Fiber Optic Transmitters
• Zero Insertion Loss Transmission Line Drivers
• Current to Voltage Converter
• Radar Systems