Número de pieza
HD74ALVCH16820
Fabricante
Hitachi -> Renesas Electronics
Description
The flip flops of the HD74ALVCH16820 are edge triggered D-type flip flops. On the positive transition of the clock (CLK) input, the device provides true data at the Q outputs. A buffered output enable (OE) input can be used to place the ten outputs in either a normal logic state (high or low logic level) or a high impedance state. In the high impedance state, the outputs neither load nor drive the bus lines significantly.
FEATUREs
• VCC = 2.3 V to 3.6 V
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
• High output current ±24 mA (@VCC = 3.0 V)
• Bus hold on data inputs eliminates the need for external pullup / pulldown resistors
Número de pieza
componentes Descripción
PDF
Fabricante
3.3-V 10-bit Flip Flops with Dual Outputs
Renesas Electronics
3.3-V 10-bit Flip Flops with Dual Outputs and 3-state Outputs
Hitachi -> Renesas Electronics
3.3-V 20-bit Flip Flops with 3-state Outputs
Hitachi -> Renesas Electronics
3.3-V 20-bit Flip Flops with 3-state Outputs
Hitachi -> Renesas Electronics
3.3-V 20-bit Flip Flops with 3-state Outputs
Renesas Electronics
3.3-V 20-bit Flip Flops with 3-state Outputs
Renesas Electronics
3.3-V 20-bit Bus Interface Flip Flops with 3-state Outputs
Hitachi -> Renesas Electronics
3.3-V 20-bit Bus Interface Flip Flops with 3-state Outputs
Hitachi -> Renesas Electronics
3.3V CMOS 10-BIT FLIP-FLOP WITH DUAL OUTPUTS
Integrated Device Technology
16-bit D-type Flip Flops with 3-state Outputs
Hitachi -> Renesas Electronics