Número de pieza
HD74LS373RPEL
Fabricante
Renesas Electronics
Octal D-type Transparent Latches (with three-state outputs)
The HD74LS373, 8-bit register features totem-pole three-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The high-impedance third state and increased high-logic-level drive provide this register with the capacity ofbeing connected directly to and driving the bus lines in a bus-organized system without need for interface or pull-up components. They are particularly attractive for implementing buffer registers, I/O
ports, bidirectional bus drivers, and working registers.
The eight latches are transparent D-type latches meaning thatwhile the enable (G) is high the Q outputs will follow the data (D) inputs. When the enable is taken low the output will be latched at the level of the data that was setup.
Número de pieza
componentes Descripción
PDF
Fabricante
Octal Transparent Latches with Three-State Outputs
Aeroflex UTMC
Octal Transparent Latches with Three-State Outputs
Aeroflex Corporation
Octal D-type Transparent Latches (with 3-state outputs) Octal D-type Transparent Latches (with inverted 3-state outputs)
Hitachi -> Renesas Electronics
Octal D-type Transparent Latches with 3-state Outputs
Hitachi -> Renesas Electronics
Octal D-type Transparent Latches with 3-state Outputs
Hitachi -> Renesas Electronics
Octal D-type Transparent Latches with 3-state Outputs
Renesas Electronics
Octal D Type Transparent Latches With 3 State Outputs
Hitachi -> Renesas Electronics
Octal D Type Transparent Latches With 3 State Outputs
Hitachi -> Renesas Electronics
Octal D-type Transparent Latches with 3-state Outputs
Hitachi -> Renesas Electronics
Octal D-type Transparent Latches with 3-state Outputs
Hitachi -> Renesas Electronics