Description
The iP1001 is a fully optimized solution for high current synchronous buck applications requiring up to 20A. The iP1001 is optimized for single-phase applications, and includes a full function fast transient response PWM control, with an optimized power semiconductor chip-set and associated passives, achieving benchmark power density. Very few external components are required, including output inductor, input & output capacitors. Further range of operation to 3.3Vin can be achieved with the addition of a simple external boost circuit, and operation up to 3.3Vout can be achieved with a simple external voltage divider.

FEATUREs
• 3.3V to 12V input voltage1
• 20A maximum load capability, with no derating up to TPCB = 90°C
• 5 bit DAC settable, 0.925V to 2V output voltage range 2
• Configurable down to 3.3Vin & up to 3.3Vout with simple external circuit 3
• 200kHz or 300kHz nominal switching frequency
• Optimized for very low power losses
• Over & undervoltage protection
• Adjustable lossless current limit
• Internal features minimize layout sensitivity *
• Very small outline 14mm x 14mm x 3mm