DESCRIPTION
The IS24C128 is an electrically erasable PROM device that uses the standard 2-wire interface for communications. The IS24C128 contains a memory array of 128K-bits (16,384 x 8), and is further subdivided into 256 pages of 64 bytes each for page write mode. This EEPROM is offered in wide operating voltages of 1.8V to 5.5V (IS24C128-2) and 2.5V to 5.5V (IS24C128-3) to be compatible with most application voltages. ISSI designed the IS24C128 to be a low-cost and low-power 2-wire EEPROM solution. The devices are packaged in 8-pin PDIP, 8-pin SOIC, and 14-pin TSSOP
FEATURES
• Organization:
– 16K-bit x 8-bit
• 64-Byte Page Write Buffer
• Two-Wire Serial Interface
– Bi-directional data transfer protocol
• Low Power CMOS Technology
– Active Current less than 2 mA (5V)
– Standby Current less than 5 µA (5V)
– Standby Current less than 2 µA (2.5V)
• Low Voltage Operation
– IS24C128-2: Vcc = 1.8V to 5.5V
– IS24C128-3: Vcc = 2.5V to 5.5V
• 400 KHz (I2C Protocol) Compatibility
• Hardware Data Protection
– Write Protect pin
• Sequential Read Feature
• Filtered Inputs for Noise Suppression
• Self time Write cycle with auto clear
– 5 ms @ 2.5V
• High Reliability
– Endurance: 100,000 Cycles
– Data Retention: 40 Years
• Commercial and Industrial temperature ranges
• 8-pin PDIP, 8-pin SOIC, and 14-pin TSSOP