GENERAL DESCRIPTION
The IS25LP032D and IS25WP032D Serial Flash memory offers a versatile storage solution with high flexibility and performance in a simplified pin count package. ISSI’s “Industry Standard Serial Interface” Flash is for systems that require limited space, a low pin count, and low power consumption. The device is accessed through a 4-wire SPI Interface consisting of a Serial Data Input (SI), Serial Data Output (SO), Serial Clock (SCK), and Chip Enable (CE#) pins, which can also be configured to serve as multi-I/O (see pin descriptions).

FEATURES
• Industry Standard Serial Interface
   - IS25LP032D: 32Mbit/4Mbyte
   - IS25WP032D: 32Mbit/4Mbyte
   - 256 bytes per Programmable Page
   - Supports standard SPI, Fast, Dual, Dual
      I/O, Quad, Quad I/O, SPI DTR, Dual I/O
      DTR, Quad I/O DTR, and QPI
   - Supports Serial Flash Discoverable
      Parameters (SFDP)
• High Performance Serial Flash (SPI)
   - 50MHz Normal and 133Mhz Fast Read
   - 532 MHz equivalent QPI
   - DTR (Dual Transfer Rate) up to 66MHz
   - Selectable Dummy Cycles
   - Configurable Drive Strength
   - Supports SPI Modes 0 and 3
   - More than 100,000 Erase/Program Cycles
   - More than 20-year Data Retention
• Flexible & Efficient Memory Architecture
   - Chip Erase with Uniform: Sector/Block
      Erase (4/32/64 Kbyte)
   - Program 1 to 256 Bytes per Page
   - Program/Erase Suspend & Resume
• Efficient Read and Program modes
   - Low Instruction Overhead Operations
   - Continuous Read 8/16/32/64-Byte
      Burst Wrap
   - Selectable Burst Length
   - QPI for Reduced Instruction Overhead
   - AutoBoot Operation
• Low Power with Wide Temp. Ranges
   - Single Voltage Supply
      IS25LP: 2.30V to 3.60V
      IS25WP: 1.65V to 1.95V
   - 4 mA Active Read Current (typ.)
   - 10 µA Standby Current (typ.)
   - 1 µA Deep Power Down (typ.)
   - Temp Grades:
      Extended: -40°C to +105°C
      Auto Grade (A3): -40°C to +125°C
• Advanced Security Protection
   - Software and Hardware Write Protection
   - Power Supply Lock Protect
   - 4x256-Byte Dedicated Security Area
      with OTP User-lockable Bits
   - 128 bit Unique ID for Each Device
      (Call Factory)
• Industry Standard Pin-out & Packages(1)
   - B = 8-pin SOIC 208mil
   - N = 8-pin SOIC 150mil
   - T = 8-contact USON 4x3mm
   - E = 8-contact XSON 4x4mm
   - K = 8-contact WSON 6x5mm
   - L = 8-contact WSON 8x6mm(Call Factory)
   - M = 16-pin SOIC 300mil
   - G= 24-ball TFBGA 4x6 ARRAY
   - H = 24-ball TFBGA 5x5 ARRAY
   - KGD (Call Factory)