datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga
HOME  >>>  Philips Electronics  >>> ISP1181 PDF

ISP1181 Hoja de datos - Philips Electronics

ISP1181 image

Número de pieza
ISP1181

Other PDF
  no available.

PDF
DOWNLOAD     

page
69 Pages

File Size
302 kB

Fabricante
Philips
Philips Electronics Philips

General description
The ISP1181 is a Universal Serial Bus (USB) interface device which complies with Universal Serial Bus Specification Rev. 1.1. It provides full-speed USB communication capacity to microcontroller or microprocessor-based systems. The ISP1181 communicates with the system’s microcontroller or microprocessor through a high-speed general-purpose parallel interface.The fully autonomous Direct Memory Access (DMA) operation - auto download, auto repeat, auto execution - removes the need for the device to re-enable or re-initialize the DMA operation every time.


FEATUREs
■ Complies with Universal Serial Bus Specification Rev. 1.1 and most Device Class specifications
■ High performance USB interface device with integrated Serial Interface Engine (SIE), FIFO memory, transceiver and 3.3 V voltage regulator
■ Interrupt endpoint can be configured in ‘rate feedback’ mode
■ High speed (11.1 Mbyte/s or 90 ns read/write cycle) parallel interface
■ Fully autonomous and multi-configuration DMA operation
■ Up to 14 programmable USB endpoints with 2 fixed control IN/OUT endpoints
■ Integrated physical 2462 bytes of multi-configuration FIFO memory
■ Endpoints with double buffering to increase throughput and ease real-time data transfer
■ Seamless interface with most microcontrollers/microprocessors
■ Bus-powered capability with low power consumption and low ‘suspend’ current
■ 6 MHz crystal oscillator with integrated PLL for low EMI Controllable LazyClock (24 kHz) output during ‘suspend
■ Software controlled connection to the USB bus (SoftConnect™)
■ Good USB connection indicator that blinks with traffic (GoodLink™)
■ Clock output with programmable frequency (up to 48 MHz)
■ Complies with the ACPI™, OnNow™ and USB power management requirements
■ Internal power-on and low-voltage reset circuit, with possibility of a software reset
■ Operation over the extended USB bus voltage range (4.0 to 5.5 V) with 5 V tolerant I/O pads
■ Operating temperature range −40 to +85 °C
■ 8 kV in-circuit ESD protection for lower cost of external components
■ Full-scan design with high fault coverage
■ Available in a TSSOP48 package.


APPLICATIONs
■ Personal digital assistant (PDA)
■ Digital camera
■ Communication device, e.g.
    ◆ router
    ◆ modem
■ Printer
■ Scanner.

Page Link's: 1  2  3  4  5  6  7  8  9  10  More Pages 

Número de pieza
componentes Descripción
PDF
Fabricante
Universal serial bus 2.0 high-speed interface device
Ver
Philips Electronics
Full-speed Universal Serial Bus peripheral controller
Ver
Philips Electronics
Full-speed Universal Serial Bus peripheral controller
Ver
Philips Electronics
Full-speed Universal Serial Bus single-chip host and device controller
Ver
Philips Electronics
Full-speed Universal Serial Bus single-chip host and device controller
Ver
Philips Electronics
Low-power Universal Serial Bus interface device with DMA
Ver
Philips Electronics
Hi-Speed Universal Serial Bus peripheral controller
Ver
Philips Electronics
Hi-Speed Universal Serial Bus peripheral controller
Ver
Philips Electronics
Hi-Speed Universal Serial Bus hub controller
Ver
Philips Electronics
Hi-Speed Universal Serial Bus hub controller
Ver
Philips Electronics

Share Link: GO URL

EnglishEnglish Korean한국어 Chinese简体中文 Japanese日本語 Russianрусский

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]