IT8500G+ series Programmable DC Electronic Load

IT8500G+ series programmable electronic load is not only a desktop power supply, but also suitable for system integration. It is specially designed for fast charging adapters, power banks, industrial power modules, power electronic device R&D and burn-in testing. It not only has the traditional CC/CV/CR/CP load mode, but also provide compound modes such as CR+CC/CV+CC/CR-LED, which are widely applicable to DUTs with different characteristics. So it performs well in limiting current overshoot and dynamic loading. Not only that, the multi-channel mode and ripple measurement mode of IT8500G+ help to reduce test cost and improve test efficiency. Without additional oscilloscope and communication interface, you can easily realize the program control of hundreds of channels.

FEATURE
◾ 7 operating modes:： CC/CV/CR/CW/CR+CC/CV+CC/CR-LED
◾ Built-in voltage and current ripple measurement functions
◾ Built in 8 fast charging communication protocol, including QC2.0,
   QC3.0, PE+, PE2.0+, USB PD2.0, USB,PD3.0, FCP, SCP *1
◾ Dynamic mode up to 20kHz
◾ Voltage measurement resolution up to 0.1mV / 0.1mA
◾ Multi-channel, up to 16 units can be connected
◾ OCP/OPP, battery discharge mode
◾ Auto test, LIST mode, short circuit mode
◾ Measure function, can measure the voltage rise/fall time
◾ Monitor 0-100% current at 0-10V (I-monitor)
◾ Built-in USB/LAN communication interface *2

APPLICATIONS
◾ Battery test 
◾ Lithium battery protection board test 
◾ Power supply test
◾ Charger test
◾ Component test 
◾ ATE